Making aluminum alloy doors and windows seems simple, but it is not an easy thing. In order to save materials, some merchants often adopt the method of short size, so the actual size is much less than the measured size, so merchants can get a lot of profits from it. Therefore, Xiao Bian teaches you the making methods aluminum doors and windows here, so that you can clearly choose good merchants. There are several main steps for making aluminum doors and windows:
The first step is to measure the work.
This work is very important, which can be said to be the core of the whole project, because all processing is carried out around this size. Once the measurement size is wrong, it can be said that the whole finished product is of little value. It wastes both manpower and material resources and a lot of time. Therefore, accurate measurement is the most critical. When measuring, we need to use steel ruler to measure. According to different environments, there are different precision. Generally speaking, the size difference cannot exceed 5mm, of course, it is not absolute, it depends on the actual situation.
The second step is the design work.
After the measurement, it is necessary to design the pattern and the way of opening the door, which is also more important. Some need to open the door inward, some need to open the door outward, and others need to open the door horizontally. The design of patterns such as colors should also be coordinated according to the whole house.
The third step is the production work
the current two steps have been completed, and the rest is the production work. Cut and assemble according to relevant dimensions. According to the requirements, design a specified number of doors and windows with fine workmanship and accuracy, so there is no need to do other treatment during installation.
The fourth step is to install
after the above steps are completed, the rest is the installation work. Fix windows and doors according to the conditions and environment of installation location. Fixed methods generally include nail pipe screws, steel nail screws, etc. Sealant can be used to seal the interface position. When installing, you need to consider the installation effect.
The fifth step is the acceptance work.
Check the original designed scheme one by one, including the interface between windows and doors, as well as the contact points between glass and aluminum frame to see if there are burrs or defects in these points. After checking the strict density of the windows, you can also check the sound insulation effect if you have requirements.
Through the simple description above, do you have a new understanding of aluminum doors and windows making methods? In fact, from the above introduction, it is not very difficult to make aluminum doors and windows. As long as we grasp several key points, other operations will become quite simple. In addition, friends who want to do it by themselves can also purchase materials in the building materials market and process them by themselves according to this description. As for tools, you can also go to the hardware store for processing.
