Now many families begin to choose to use aluminum doors and windows in the decoration. Since aluminum is a special metal material, are we at a loss when scrubbing these aluminum doors and windows? Here is a small Editor to teach you some aluminum alloy doors and windows the cleaning method.
![4e8cead8bd16717cb2e7cdadd2eba907[1]](https://img1.doors10.com/UploadFiles/2021/0623/202106100537pugwa3owtwp.jpg)
1. When cleaning aluminum doors and windows, do not step on the aluminum frame or hold the frame for support. In this way, it is easy to wear doors and windows or cause accidents.
2. Aluminum doors and windows can be stained with clean water or neutral detergent with soft cloth. Do not use ordinary soap and washing powder, let alone use strong acid and alkali cleaners such as stain removing powder and toilet detergent, which will corrode the surface of the profile.
3. Sealing wool tops and silicon sealant are the key structures to ensure the sealing and insulation of aluminum doors and windows. If they fall off, they should be repaired and replaced in time.
4. After rainy days, wet glass and window frames should be wiped out in time.
5. Check the connection parts of the door and window frame frequently, tighten the bolts in time, and replace the damaged parts. Locate vulnerable parts of aluminum alloy doors and windows such as shaft pin, wind brace, and floor spring, and check them frequently. Add lubricating oil regularly to keep them clean and flexible.
6. When using aluminum doors and windows, the action should be light, so push and pull let nature take its course; If you find any difficulty, don't pull and push hard, and you should eliminate the fault first. Ash accumulation and deformation are the main reasons for the difficulty of sliding and pulling aluminum alloy doors and windows. Keep the door frame clean, especially the sliding groove clean. A vacuum cleaner can be used to remove wool tops of dust accumulated in the groove and door seal.
7. Always check the joint of aluminum door and window frame wall. If aluminum doors and windows are loose for a long time, the frame will be easily deformed, making the doors and windows unable to be closed and sealed. Therefore, the screw at the joint should be tightened immediately. If the screw footing is loose, use epoxy strong glue to adjust a small amount of cement to seal. Source: NetEase
