The surface effect of the newly produced wooden door is very good. After it can be placed for a period of time, the surface effect of the wooden door becomes worse, the gloss is also weakened, and the surface layer is not so smooth, at this time, we need to repair it paint coating. The following small editor will introduce how to repair wooden door paint. First of all, we need to prepare some tools, such as 502 glue, knife and sawdust left during Decoration. First, use 502 glue and sawdust to make up for the paint falling, then use a knife to flatten the place where the paint fell off. This sequence needs to be repeated until the place where the bump is smooth with the surroundings.
502 glue is applied to the bump;
Put sawdust powder on the place where the collision occurs;
Finally, use glue to make up carefully;
Wait until the glue is completely dry, then use a knife to shovel it flat, and after repeated operation, use a knife to shovel the repaired place and the surrounding area flat;
After checking, it is indeed smooth with the surroundings, then 400# sandpaper can be replaced for grinding;
After polishing the sandpaper, the bump has obviously been handled very smoothly.
So far, the basic details of the early bump repair have been processed, but it is not over yet. The following stage of paint mixing is entered, because the paint color of the door leaf is not monochrome, therefore, we need to mix and adjust two or more paint colors (for example, red with yellow is orange, yellow with blue is green, blue with red is purple) the final color needed adopts this color matching method, and the paint can be added appropriately. After the color of the paint is adjusted, we start to paint the damaged place. First of all, we use some paint dipped in the finger belly to apply directly to the damaged place, so that we can accurately grasp the degree of repair.
Note: the already good paint can clearly see that the effect of wooden door collision after finishing paint is completely different. Although the paint color has covered the phenomenon of bumping, the details have not been handled well. In order to be more refined, 502 glue and sandpaper are used to smooth the construction site and stick it firmly. Although it was sand-papering and the glue was stuck, the details of the paint repair were still not reached, so the master's door was polished repeatedly with No. 400 sandpaper. In addition to steel wool, it is easy to use a brush cloth with a harder texture. Look at the effect again, the sandpaper printing is gone. Clean the construction site with clean cotton cloth. If you are not satisfied with embellishing, you can use cotton cloth with toner to coordinate repeatedly. Do not forget to wipe with cotton cloth during the period. If there are professional tools, polishing water can be used here to Polish, and the paint powder can be more evenly binding together. And maintain a certain gloss. After the color is dry, spray the cleaning paint to make the surface shine.
The above is the introduction about the repair method of wooden door paint, hoping to be helpful for everyone to repair wooden door paint. In addition, the editor also needs to remind you that you must be careful when repairing the wooden door paint coating, otherwise it will affect the repair work and the aesthetic degree of the wooden door.
Editor: China door and window network -- ak
