Vertical hinged door is the most widely used and numerous door in our life. Vertical hinged door has many advantages, its sealing performance is good, and it also has certain sound insulation effect. Compared with push-pull and rolling shutter doors, although it occupies a large space, it benefits from the opening and closing characteristics of sectorial, the security of vertical hinged door is quite good. In our life, it is not difficult to install vertical hinged door. Today, I would like to share with you some vertical hinged door installation steps and maintenance skills, which greatly increases vertical hinged door service time for us.
Vertical hinged door installation procedure
1. First, remove vertical hinged door pieces from the split pattern of the door frame.
2. Remove the connection aluminum strip under the door frame and turn the fixing pieces on both sides of the door leaf to the appropriate position.
3. Push the door frame from the front of the door opening into the entry hole to determine the position of the front and rear of the door frame.
4. It is worth noting that the door frame must use horizontal ruler to adjust the flatness and verticality, and adjust the distance between the door lock frame and the door hinge frame.
5. After confirming that there is no problem with the adjusted size, fix the door frame fixing piece to the wall.
6. Finally, insert the door leaf into the split hinge of the door frame again, and then check whether the opening and closing of the door leaf is smooth and fluent.
Vertical hinged door things to pay attention to when installing
1. When installing vertical hinged door, we should pay attention to the assembly quality of the door, the joints should be smooth, and the frame fan should not be split and the corners should not be broken.
2. Protect the surface of the door, avoid hard objects scratching the surface, and prohibit the use of hard objects to clean the dirt on the surface of the door leaf.
3. For vertical hinged door with glass, the selection of rubber layering is not appropriate, which will lead to poor sealing effect, and the rubber strip used for sealing will be easily disengaged at the corner. The correct way is to brush the glue under the sealing strip to make it firmly combined with glass frame fans.
4. The glass door leaf is not cleaned up or has cracks. After installing the glass, wipe the surface clean with a soft cloth in time to achieve the effect of transparency and brightness, and replace the cracked glass in time.
5. The size of glass cutting should be well mastered. If the size is not measured according to the actual object, it is difficult to meet the size requirements after cutting.
Vertical hinged door maintenance
1. Try not to touch the door lock with wet hands, or splash corrosive liquid onto the wooden door and door lock, and do not switch the door leaf violently.
2. Avoid sharp objects directly bumping and scratching the door leaf, and do not hang heavy-weight items on the door.
3. When wiping the glass door, do not let detergent and water seep into the proportional layering to avoid deformation of the layering. When wiping the glass, too much force will damage the glass, and do not place too heavy hands.
4. Clear the dust on the wooden door. You can use a vacuum cleaner. Do not rub the edges and corners of the wooden door frequently to avoid fading and damage of the decorative materials of the edges and corners.
The above are some key points of installation and maintenance of vertical hinged door. We should not only protect the door leaf during installation, but also avoid damage to the door leaf as much as possible in future maintenance.
Editor: China door and window network -- ak
