Aluminum clad wood doors and windows types:
1. According to different uses, it can be divided into oak aluminum clad wood doors and windows, African Pterocarpus erinaceus Poir. Aluminum clad wood doors and windows, American black walnut aluminum clad wood doors and windows, South Asia Rosewood aluminum clad wood doors and windows, etc.
2. According to different styles, it can be divided into German, American, European, Chinese and Italian.
3. According to the different opening methods, it can be divided into casement window, folding door, pour inside windows, open outside, open up, push and pull flat open multi-functional combination windows.
Aluminum clad wood doors and windows price:
Aluminum clad wood doors and windows the price varies greatly according to different wood materials, hardware, glass configuration and processing techniques. Generally, there are those around 1800-3500 yuan.
Aluminum clad wood doors and windows installation process:
1. Before installation, check whether there are channeling angle, twisting, bending and splitting.
2. The side of the frame against the ground should be brushed anticorrosive paint. Other surfaces and fans should be brushed with clear oil. After brushing oil, it should be laid flat. The bottom layer should be padded flat and high, and the sun and rain are not allowed.
3. Before installing the outer window, find the window frame position. During the debugging of the window installation, the 50cm flat line will pop up in advance and mark the installation position on the wall.
4. Install according to the size of the drawing, pay attention to the cutting direction, and the installation height is controlled according to the indoor 50cm flat line.
5. The installation should be carried out before plastering, and Casement must pay attention to the protection of finished products to prevent collision and pollution.
Aluminum clad wood doors and windows installation details:
1. Beautiful appearance
The surface paint film has no quality defects, the color is harmonious, and the tree species should be the same.
2. Doors and windows cannot be deformed
The door casement can be inserted into the door and window frame and are consistent. If the gap is large, the door casement can be removed and re-planed. If it is not vertical, the gasket in the frame plate should be straight.
3. The hinge position is correct
Accurate location and firm installation. If the hinge is not straight, screw one screw on each hinge first, and then tighten all screws after the adjustment is correct. If the hinge screw is short or screw tightening, the appropriate screw should be replaced. When the screw is installed, it must be straight. The screw should be nailed in 1/3 first, and the rest should be screwed in.
4. Window and door sets must have basic materials
First fix the basal plate on the base keel of the window frame, then nail the lines, and then cover basal plate and trim board. If the side plate is knocked by hand, it means that there is no base plate on the bottom layer, it should be removed and redone.
Aluminum clad wood doors and windows the installation method of installing the sub-frame first and then the main frame is adopted. The installation precision is high and the construction quality is good. The sub-frame is made of anti-corrosion Wood and fixed by window wings special to American windows at the same time, it can ensure the waterproof performance of the form. High installation precision and good construction quality ensure the waterproof performance of the window.
Editor: China door and window network -- ak
