In the Decoration of Houses, the bedroom needs to be paid close attention to. After all, it is a place for rest. The time of contact with the body should be the longest. The decoration is directly related to health and mood. Nowadays, the application of bedroom sliding door in family life is very common, and many consumers like sliding door more than expected. The praise is constant, and the installation of sliding door in the bedroom does have a good effect, however, the installation needs to be done well, otherwise it will affect the use. So, how to install bedroom sliding door and how to purchase bedroom sliding door?
How to install bedroom sliding door 1. Installation of upper slide: when installing the upper slide, the same door beam or awning beam must be fixed according to the requirements of the door opening width and opening direction. Generally, the following points should be paid attention to when the center of the door opening width is used as the reference. The slide is the same as awning the left and right elevation of the beam or the door beam joint is consistent with the size of the slide relative to the center of the door opening. The center line of the slide is the same as the size outside the color board exterior wall or brick wall, and its size is half of the thickness of the door leaf plus a gap of 20mm? If it is a color board exterior wall, you need to add another 20mm edge width.
2. Door leaf installation: The door leaf and pulley system are processed and formed by the company in the workshop. After the installation of the upper slide, put the pulley into the slide sliding chute in pairs, then use manual or other hoisting tools to carry the door leaf vertically below it, and put the welded screw on the door leaf into the bolt hole on the pulley. Temporary fastening of double nuts. Similarly, hang another door leaf first.
3. Door leaf adjustment: after the door leaf has been hung, push the two door leaves to the center of the door opening and stick them tightly. According to the requirements of the outdoor floor elevation, adjust the flat steel under the door leaf to 0~10mm on the upper surface of the floor and adjust the connection between the two door leaves at the same time. The gap is to the smallest and the side is perpendicular to the ground. The elevation adjustment is carried out by using the nut on the elastic top. After all adjustment of the door leaf, fix the thrust pin on the pulley with the cotter pin.
4. Door stopper: after the installation of the door leaf is all adjusted, close and push the door leaf respectively. According to its position, weld the bottom of the upper slide or the inside with angle Steel stopper at a distance of 10mm from the edge of the pulley to limit the opening area of the door leaf. Within its valid range. The contact between angle steel and pulley requires setting hard rubber pad of not less than 20mm as buffer.
5. Installation of cake guide and stopper under the door: the installation requirements of the guide cake and the stopper under the door should be coordinated with the civil engineering. The key point is that the center line of the guide cake can be positioned according to the actual position of the flat steel under the door leaf. The distance between the guide cake exposed to the ground is 10~15mm and 500mm. When positioning the lower stopper, push the door leaf to the position 10~20mm away from the outside to be buried in the concrete or fix it with expansion bolts after concrete construction.
6. Installation of door hardware accessories: sliding door hardware accessories are commonly used in door handle, after the door installation and adjustment are completed and correct, the lock can be carried out according to the installation requirements of hardware accessories used in each project. Note that the plane position and standard height requirements of the accessories are at the same position. It affects the appearance.
How to choose bedroom sliding door 1. The thickness of bedroom sliding door: If glass or silver mirror is used as the door core, 5mm thick is generally used; If wooden board is used as the door core, 10mm thickness is the best. Some manufacturers use thinner boards (8mm or even 6mm) instead to save material costs. The board is too thin, and it seems to shake gently when pushed and pulled, with poor stability. Moreover, after using it for a period of time, it is easy to warp and deform, and the card guide rail will cause the push and pull is not smooth, affecting the normal use.
2. Bedroom sliding door materials: see if green environmental protection materials are selected. If the formaldehyde content of the cabinet door or cabinet material in the wardrobe is too high, it will adversely affect the health of users. According to the sampling inspection of relevant national departments, most of the products imported from Europe or domestic large artificial plate manufacturers can reach E1 Standard, while the formaldehyde content of some domestic Miscellaneous brand products often exceeds the standard. When purchasing, you can open the wardrobe and smell the pungent smell.
3. Bedroom sliding door pulley: pulley is the most important hardware component in sliding door. Currently, there are three kinds of pulley materials on the market: plastic pulley, metal pulley and glass fiber pulley. The metal pulley is strong, but it is easy to generate noise when it comes into contact with the track; The glass fiber pulley, containing roller bearings, is smooth to push and pull, wear-resistant and durable, and the box-type closed structure is effectively dustproof, the two anti-jump devices ensure safety and reliability during sliding; While some low-grade sliding door wheels, made of organic plastic, are easy to wear and deform. After a long push and pull, they will rise and fall, the open wheel structure is easy to enter dust and wear internal bearings, and it is difficult to ensure flexible push and pull. An anti-jump device does not even have an anti-jump device. It is easy to derail when push and pull, which is very unsafe.
4. Bedroom sliding door profiles: aluminum alloy is usually used as the main material, and galvanized steel is also used. It requires good rigidity, high strength, and not easy to deform, but it cannot be too heavy, it is easy to shorten the service life of the pulley. The door frame made of profiles with poor quality will be deformed after a long time, and the cabinet door will jump out of door rail when pulled.
5. Bedroom sliding door manufacturers: sliding door manufacturers with poor strength may make a beautiful warranty promise to customers in order to receive orders before sales. When customers find problems in use and need after-sales services such as maintenance, or listen to it, or push the three obstacles, or deal with it casually, all kinds of service problems will be exposed. Therefore, it is suggested that consumers should fully understand the strength of the manufacturer before ordering, find out the warranty period, and ask for the product warranty card after the product is installed. After all, sliding door is also a costly household durable consumer goods.
6. Bedroom sliding door track: ground rack the rationality of the design directly affects the comfort and service life of the product. Consumers should choose a style with good foot feeling and good cleaning and hygiene when purchasing. At the same time, for the safety of the elderly and children in the family, the height of ground rack should not exceed 5mm.
This is the case of "how to install bedroom sliding door and how to buy bedroom sliding door". The material of bedroom sliding door should be chosen well, and other requirements should also be considered clearly, such as the style of sliding door, etc, in fact, we must make sure that our home life is smoother and more comfortable, and we must choose it according to our own needs.
Editor: China door and window network -- ak
