Broken bridge aluminum doors and windows it is a popular door and window, basically new flats and old house renovation are the first choice broken bridge aluminum doors and windows, although everyone is away broken bridge aluminum doors and windows very close, and most customers use it every day broken bridge aluminum doors and windows, but broken bridge aluminum doors and windows I still don't understand some professional aspects. Let's learn more about it.
I. Bridge-cutoff aluminum alloy doors and windows the section of the profile before the set angle must be coated with the section sealant. When the set angle is applied, the two-component angle code glue is guided to the angle code cavity through flow deflector to achieve the best connection strength.
II. Bridge-cutoff aluminum alloy doors and windows T. Before Cross Connection, the profile section must be coated with section sealant. When connecting, two-component angle code glue should be injected to strengthen the connection and seal the joint with sealant.
III, all adhesive strips including glass sealant strips are made of EPDM rubber with high quality performance. The T-type or duck-type adhesive strips between the opening fan and the frame of EPDM doors and windows are connected tightly in the straight section at the 90-degree corner of the setting corner adhesive strips. Match each other at the same time.
4. Bridge-cutoff aluminum alloy doors and windows glass buckle is easy to install and disassemble by square buckle.
V. Seam allowance the adhesive strip shall ensure that it is still connected after the hinge is installed and that the adhesive strip of the contact part between the hinge and the profile is sealed.
VI. Drainage adopts isobaric principle and interplate T-shaped sealing treatment with cross connection to realize the self-drainage function of independent plates. In the drainage channel of independent plates, drainage measures without retention should be adopted, such as C- type heat insulation strip.
VII. The processing of drainage structure should not destroy the connection strength between aluminum profile and heat insulation strip.
