Do aluminum alloy doors and windows need maintenance? What should be done is the correct maintenance? I believe this is a problem that few people pay attention. In recent years, more and more people have chosen aluminum alloy |] Windows. Although aluminium alloy door] windows have excellent functions, we still need to pay attention to them in daily use, maintain and maintain it regularly, so as to prevent aluminium alloy door window damage and prolong its service life.
So how should aluminum alloy doors and windows be properly maintained?
1. When wiping and cleaning aluminum alloy doors and windows such as glass, frame, Casement, etc., soft cloth can be used to touch clean water or neutral detergent. Do not use washing powder, let alone stain removing powder, strong acid and alkali cleaning agents such as toilet washing essence will corrode the surface protective layer of profiles and hardware. In the process of wiping and cleaning, make sure that parts such as glass, frame and hardware are not scratched or latte art.
II. Regularly every three months, the groove at the junction of the frame fan and the slide rail should be cleaned and buried to prevent the accumulated dust, sand and stone from adversely affecting the normal use of hardware, also?? Use soft hair or vacuum cleaner for finishing.
3. When maintaining aluminum alloy doors and windows, do not directly step on the aluminum frame or hold the window frame to support the body. It is easy to damage doors and windows and related accessories, including accidental safety accidents caused by carelessness or improper protection.
4. Every three months, the hardware parts of the corner and fan corner of the Broken Bridge aluminum I doors and windows should be checked, and the bolts should be tightened in time to replace the damaged parts. Check the vulnerable parts of aluminum alloy I] windows such as positioning hinges, wind brace and handle transmission rods, and add varnish lubrication to relevant parts when necessary. Sealant strip and silicon sealant are the key components to ensure the sealing and insulation of aluminum doors and windows. If there is any drop or damage, it needs to be repaired in time and replaced in serious cases.
5. If the exposed aluminum parts of aluminum alloy doors and windows are oxidized, you can use a knife to scrape off the aluminum rust quietly, then wipe it with water, wipe the liver cloth dry, and then polish it with wax oil, it is more smooth as new. Every six months, lubricating oil can be used to lubricate and maintain hardware rolling, sliding, locking points and other parts, and then repeat the opening 3- 5 times to ensure smoothness and increase the sensitivity of hardware transmission mechanism, ensure smooth use to prolong the service life.
Six, aluminum alloy doors and windows in use, the action should be light, push and pull gently, find it difficult to push, do not pull hard push, should first check and troubleshoot. If it is found that it is difficult to push and pull aluminum alloy doors and windows due to accumulated stone dust and deformation, it is necessary to clean up the accumulated stone dust in time, especially the cleaning of the sliding groove. It is not possible to use a vacuum cleaner to remove wool tops of the accumulated dust sealed in the groove, the deformation should be repaired and restored in time.
Editor: China door and window network -- ak
