Aluminum alloy doors and windows leak? What should I do? Now the leakage of air and rain from Windows is one of the common problems of doors and windows, which makes many owners "headache", especially when it rains, there may be 10,000 Grass Mud Horses rushing inside, because window leakage will cause rainwater to enter the room, which will definitely cause great damage to the decoration. If it's serious, it needs to be redecorated. You can say that you don't have a headache ". So what is the solution to the leakage of aluminum alloy doors and windows? If you want to cure the disease, you must first find its root before you can prescribe the right medicine.
First: find the root cause
First of all, we should observe what causes the leakage of aluminum alloy doors and windows, which is the defect of doors and windows in the design process? Is the quality requirement not met during processing and installation? Or is the density of the connection part with the opening wall not handled properly?
Second: the right medicine
1. If there are defects in doors and windows during the design process, this is the difference between big brands and small brands. You can only complain about yourself because of professional aluminum alloy doors and windows brands, whether they are designers, production technology and material use are professional and the best. In personnel training, we pay more attention to training and have solid professional knowledge. At this time, it is suggested to change doors and windows quickly to reduce the hazard coefficient.
2. If aluminum alloy doors and windows leak during processing and installation, we should check the size and verticality of the gap between the drain hole, window frame and wall. If not, it is necessary to ask a professional installer to remove the aluminum alloy doors and windows and reinstall them once again, and inspect them again on site.
3. If it is the reason for the density of the connection between aluminum alloy doors and windows and the wall at the opening, first of all, we need to see if the density bar is aging to crack, or Styrofoam is too soft, then if this is the case, we will replace the density bar ourselves, and we will find professionals for Styrofoam reasons.
In the final analysis, if you buy aluminum alloy doors and windows, you must choose a big brand and a major, so that your aluminum alloy doors and windows will not leak.
Editor: China door and window network -- ak
