The study kitchen in the family and the balcony of the living room use sliding door partition door, this kind of door does not occupy extra space, and it is ideal to use. In addition to sliding door, sliding window is also chosen by many families. There are usually locks on the door, so how can sliding door be locked? Sliding Door What is the locking method? Nine Zheng below door and window net let's explain it to you. Let's have a look.
Sliding Door how to install the lock?
1. When installing a lock for a sliding door, you only need to lock it directly? It is OK to go to door set and the frame of the door. If you want to live in sliding door lock, you only need to move it to door set. The installation of sliding door locks is similar to that of ordinary doors. If you want to look better after installation, you 'd better use locks specially used on sliding doors.
2. Sliding door of the two doors basically overlap, so it must be difficult to install the lock in the middle. Therefore, install the lock on the sliding door on both sides, and open a fan normally.
3. Some sliding door have four doors. At this time, the sliding doors on both sides can be fixed with small nails, and the horizontal rows in the middle can be more convenient to install with locks, when using it, just open the two in the middle.
Sliding door locking method:
1. You 'd better arrive hardware the store found a master with experience in installing locks to install locks. If you operate by yourself, please open the fixed distance sample according to the installation requirements in the product manual first according to the installation size of the lock body.
2. Check whether the cut hole is accurate, put the lock body into the hole position in turn, find the front and rear fixing screws, install the screw and connecting screw on the outer panel parts, insert the linkage square bar into the square bar hole of the lock body, outer panel parts handle square holes align with connecting square bar holes, install outer panel parts, and strictly follow the steps in the product installation instructions.
3. Install the inner panel parts, fasten the screws to the front and rear; Insert the lock head body into the lock body keyhole from the inside to the outside; Insert the screws into the lock body panel hole and align the lock head body mounting hole thread before tightening. Install latching box or lock plate on the door frame.
4. After the initial installation, turn the inside and outside handles of the Crescent lock to observe whether the latch bolt can be smoothly withdrawn and extended; Turn the rear panel knob to feel whether the dead bolt is smoothly withdrawn; insert the key to rotate back and forth and feel whether dead bolt is smoothly extended and withdrawn. After fastening each assembly screw of the Crescent lock with a screwdriver, repeat the above action and rotate it several times to ensure that the Bolt can move in and out freely after the screw is fixed.
The above is the introduction of how to lock sliding door and how to lock sliding door. I believe everyone should know what happened after reading it. The content is for your reference only. I hope it can be helpful to everyone, if the requirements are higher, it is recommended to ask professional people to install it.
