Broken bridge aluminum doors and windows what aspects should be paid attention to in terms of usage and cleaning methods?
1. Cleaning broken bridge aluminum doors and windows when, people must not step on the aluminum frame or hold the frame for support.
2. Sealing wool tops and silicon sealant are guaranteed broken bridge aluminum doors and windows the key to sealing, heat preservation and waterproof should be repaired and replaced in time if it falls off.
3, broken bridge aluminum doors and windows it can be wiped with soft cloth with clean water or neutral detergent. Ordinary soap and washing powder cannot be used, and strong acid and alkali cleaners such as stain removing powder and toilet detergent cannot be used.
4. After rainy days, the raindrop of glass and door and window frames should be timely, and special attention should be paid to sliding chute water accumulation. Sliding chute for a long time, the friction force increases, you can add a little oil or apply a layer of fire wax oil.
5. Always check the tightening bolts, positioning axis, wind brace, floor spring, etc., and replace damaged parts and vulnerable parts of aluminum alloy doors and windows in time. Add lubricating oil regularly to keep it clean and flexible.
6, broken bridge aluminum doors and windows in the process of using, you should gently push and pull, push and pull to let nature take its course, do not force if you find difficulties, and eliminate the fault first. Dust accumulation and deformation are the main reasons for the difficulty of sliding and pulling aluminum alloy doors and windows. Keep the door frame clean, especially Slot broaching clean. A vacuum cleaner can be used to remove wool tops of dust accumulated in the groove and door seal.
7. Check frequently broken bridge aluminum doors and windows at the junction of the frame wall, if it is loose for a long time, it is easy to deform the frame as a whole, making the doors and windows unable to be closed and sealed. Therefore, the screw at the joint should be tightened immediately. If the screw footing is loose, use epoxy strong glue to adjust a small amount of cement to seal.
In broken bridge aluminum doors and windows if we can try our best to achieve the above seven points in terms of use and cleaning, then, broken bridge aluminum doors and windows the later maintenance and maintenance are already considered to be the high-quality maintenance in the maintenance of doors and windows.
