I. Sliding door Track classification
sliding door can be divided into double push-pull track, single push-pull track and folding push-pull rotating to the axis. Folding sliding door occupies a small space, but the sealing performance is the worst in sliding door.
2. Sliding door track installation steps:
the most important thing to install sliding door is to install the track,
1. The size of sliding door on the upper part of track box should be 12cm high and 9cm wide. Like curtain box, install the track within track box, which can hang sliding door on the track. When the height of the door is less than 1.95 meters, it makes people feel very depressed. Therefore, when making sliding door, the height should be at least 195 12=207cm.
2. The gold size of the normal door is about 80cm × 200cm. Under this structure, the door is relatively stable and beautiful at the same time. Therefore, the ratio of width to height of sliding door is similar to that of gold.
3. Use sliding door (open rail track box) from floor to top with caution. Because the swing scope is too large when pushing and pulling, it is easy to deform for a long time sliding door, and the deformed back door cannot be opened, which means that it cannot be repaired or used.
4. Finally, install the sliding door track: fix the upper track, and use the gravity cone (plumb bob) to hang 3 points at both ends of the upper track and the middle point on the ground and draw 3.3 points on the ground with oil, install the upper track, then put a drop hammer to the ground at the center of the upper track, and put a perpendicular line at both ends of the track, the lower track is fixed at these three points so as to ensure that the upper and lower tracks are completely parallel, and the sliding door is in the best state.
Boshi Editor Tips: it is best to hire professional workers to install. Pay attention to protective measures.
