Many people think that the doors and windows should be opened in hot summer to cool down. In fact, it is not. During the day, the outdoor temperature is high, doors and windows are wide open, and sunshine and heat radiation are accompanied by bursts of hot air coming into the room, which will make the indoor and outdoor heat become ordinary.
If doors and windows are opened for ventilation in the morning and evening to allow air circulation, and doors and windows are closed during the day, especially at noon, to isolate the invasion of outdoor hot air, and light curtains are pulled to block sunlight, reflecting heat radiation can make the room cooler.
Introduction and function of doors and windows
door: indoor and outdoor transport relationship, traffic evacuation (also plays the role of ventilation and lighting)-scale, location, opening and structure.
Window: ventilation, lighting (the function of viewing)-form, opening and structure of filial piety.
One of the functions
doors and windows are divided into enclosure components or partition components according to their positions, and have different design requirements to have functions of heat preservation, heat insulation, sound insulation, waterproof, fire prevention, etc.
The new requirement is energy saving. The Heat lost by the gap between doors and windows in cold areas accounts for about 25% of the total heating heat consumption.
The requirement of window tightness is an important content in energy-saving design. Doors and windows are important components of building envelope system.
Function II
doors and windows are also important components of architectural modeling (the contrast between reality and reality and the artistic effect of rhythm play an important role).
Therefore, their shape, size, proportion, arrangement, color, modeling and so on have a great influence on the overall modeling of the building.
Role 3
nowadays, many people install double-layer glass doors and windows. In addition to enhancing the effect of heat preservation, the important function is sound insulation, the prosperity of the city, dense living and developed transportation, the effect of anacoustic is becoming more and more popular.
Casement window
the advantages are large opening area, good ventilation, good sealing performance, excellent sound insulation, heat preservation and impermeability. The open window is convenient to clean; The open window does not occupy space when it is opened.
The opening of outwards opening window takes up a piece of space outside the wall, which is easily damaged when the wind blows; While the opening of in-swinging casement window takes up part of the indoor space, it is not convenient to use car window shade, and it is also inconvenient to use car window shade and curtains when opening the window, if the quality is not good, it may rain.
Upper suspension type
hanging window this is a kind of aluminum-clad wood, aluminum alloy and plastic steel window that appeared later. It is a new form developed on the basis of casement window.
It has two opening modes, which can be opened flat and pushed away from the upper part. When Casement window is closed, pull the upper part of the window inward to open a gap of about ten centimeters, that is, the window can be opened a little from above, and the open part is suspended in the air, it is connected and fixed with window frame through hinges and so on, so it is called upper suspension type.
Its advantages are: it can not only ventilate, but also ensure safety. Because there are hinges, the window can only open the seam of ten centimeters, and it cannot be reached from the outside, which is especially suitable for use when no one is at home. This function is not only limited to flat windows, but also can be opened on the sliding window.
Simple European style window
european-style windows are decorated with European-style doors and windows. According to different regional cultures, it can be divided into northern Europe, simple Europe and traditional European style.
The pastoral style was popular in Europe in the 17th century, emphasizing the changes of linear flow and gorgeous colors. It is based on romanticism in form. The decoration materials are usually marble, colorful fabrics, exquisite carpets and exquisite French wall hanging. The whole style is luxurious and rich, full of strong dynamic effect.
The other is the Rococo style, which is decorated with light and slender curves. The effect is elegant and friendly. The royal palace nobles in Europe prefer this style. This needs to be decorated with the overall style of the home.
Balcony courtyard greening and planting trees and flowers not only have high ornamental value, but also have the function of regulating microclimate, which will make the air fresh, cool and pleasant.
Because green plants can not only shade the sun, but also reduce the temperature by evaporating water from the leaves. Some data show that planting some flowers and plants on the balcony of the courtyard can cool the room by 2℃ ~ 4℃.
After wiping the floor with wet mop indoors, turn on the ceiling fan to make the ground water evaporate and absorb heat; You can also put a basin of cold water in front of the fan to turn on the fan to make the water steam give off cool wind. This can reduce the room temperature.
Jinpai Huating provides you with more professional doors and windows.
Jinpai Huating doors and windows is a comprehensive door company integrating the development, production and sales of aluminum alloy decorative doors.
The products in charge include Sunshine Room, high-end broken bridge casement window, aluminium alloy door, sliding door, hanging door, folding door, open flat door, etc.
Selection of high quality silicon magnesium aluminum alloy profiles, configuration of high quality hardware, with exquisite assembly technology, so that the products in the whole production process by strict international quality assurance system control.
The whole process adopts European manufacturing technology, which has undergone strict inspection from raw materials entering the factory, processing and production, assembly and debugging, thus ensuring that the quality and technical performance of the products meet the national standards.
