Sliding Door How to Deal with These Common Problems?


Sliding door, also called sliding door. In addition to providing sealing and dustproof functions for wardrobes and cloakrooms, it can also be used in kitchens, balconies, toilets and other places, which plays a very good role in space separation and increasing privacy.

The following is a summary of frequently asked questions about sliding doors:

what should I do if the sliding door feels heavy and it is difficult to move?

1. The hanging rail is not matched with the hanging wheel, and supporting products can be selected;

2. If the hanging rail is deformed during installation, replace the hanging rail;

3. Adjust the level of the hanging rail again if the hanging rail is not horizontal;

4. The lower side of the door meets the ground, or the locator and the door are not on a vertical line, adjust the height of the door or move the position of the locator;

5. The bearing of the hanging wheel is poor or there is no bearing at all, or the outer layer is too soft to replace the hanging wheel;

6. The left and right sides of the door are high and low. Adjust the left and right sides of the door.

How to measure the size of the glass sliding door?

When measuring the size of furniture glass sliding door, it is mainly to measure the height and width accurately. When measuring the height, first measure the height of the sliding door, then add the depth of the glass mouth above the sliding door, and then subtract 0.1cm, which is just size of the height of the glass sliding door.

For example, if the height of the sliding door is 45cm and the depth of the upper glass groove is 0.8cm, then the height of the glass sliding door should be 45.7cm. Measure the width size, as long as the sliding door part is opened (width), and then one part of the size is two, add about 3cm on each side, which is the width size of the glass sliding door. For example, if the opening room of the sliding door is 100cm, the width of the two glass sliding doors is 53cm. The formula is: Width = height of sliding door glass groove depth-0.1cm; Width = width of sliding door/2 3cm.

How many times can pulley sliding door generally be pushed and pulled?

Sliding doors generally require pushing and pulling more than 60000 times, and brands can reach more than 100000 times. The material of the pulley is also very important. At present, there are mainly three kinds of plastic pulley, metal pulley and glass fiber pulley.

The plastic pulley is hard, but it will become astringent and hard for a long time and cannot slide; The metal pulley is strong, but it generates noise when it comes into contact with the track; The glass is tenacity of fiber and has good wear resistance, smooth sliding.

In addition, a good pulley is often designed with two anti-jump devices to ensure that the sliding door is safe from derailting when sliding. You must choose carefully.

Several ways to install doors in kitchen and toilet:

the original door openings in many kitchens and bathrooms are generally small. If you want to install sliding door, there are two ways:

1). Expand the original door opening and leave the space of two doors, which is more flexible and the toilet can be locked;

2). If you install monorail sliding door, you can make a clamping Wall, hide it when you open it, or install it outside the door opening. If you install it on the side, you 'd better make a curtain box-style box above the door opening, which is both beautiful and safe.

How to clean the sliding door?

1. Regularly clean the surface of the sliding door with soft cloth with clean water or neutral detergent. Do not use ordinary soap and washing powder, let alone use strong acid and alkali cleaners such as stain removing powder and toilet detergent.

2. Sandpaper, wire brush or other> Other> Other friction materials are not allowed to be cleaned. After cleaning, clean them with clean water, especially in places with cracks and dirt, also use soft cloth with alcohol to scrub.

3. If the main material of the sliding door is made of plate material, the wet rag used during cleaning should not have too much moisture, as long as it is kept moist.