Although aluminum-wood doors and windows product has outstanding performance advantages, just as "Qianli horse" also needs "Bole" appreciation, aluminum-wood doors and windows also needs certain maintenance and maintenance methods in normal times to avoid quality damage as much as possible, so as to prolong the service life of aluminum-wood doors and windows and make better use of it. Today, Xiao Bian will share with you the maintenance tips of aluminum-wood doors and windows!
Aluminum-wood doors and windows maintenance methods
key points
1. When cleaning aluminum-wood doors and windows parts such as glass, frame, fan, etc., soft cloth can be used to touch clean water or neutral detergent. Do not use ordinary soap and washing powder, let alone stain removing powder, strong acid and alkali cleaners such as toilet washing essence will corrode the surface of the profile, thus ensuring that the glass, frame and other parts are not scratched.
2. Clean the groove and slide rail at the junction of Casement every three months to prevent dust, sand and stone from adversely affecting the normal use of hardware. Soft wool or vacuum cleaner can be used for cleaning. After rainy days, wet glass and window frames should be wiped dry in time.
3. When cleaning aluminum doors and windows, do not step on the aluminum frame or hold the frame for support, which is easy to wear doors and windows or cause accidents.
4. Deal with Aluminum every three months check the hardware at the corner of the door and window frame, tighten the bolts in time, replace the damaged parts and locate them. Positioning shaft pin, wind brace, floor spring, etc. The vulnerable parts of aluminum alloy doors and windows should be checked frequently, and lubricating oil should be added regularly to keep them clean and flexible. Sealing wool tops and silicon sealant are the key structures to ensure the sealing and insulation of aluminum doors and windows. If they fall off, they should be modified and replaced in time.
(Image Source: Red oak doors and windows official website, invasion and deletion)
5. Aluminum if the wooden doors and windows rust due to oxidation, you can use a knife to gently scrape off the aluminum rust, wash it with soap, wipe it with a dry cloth, polish it with wax oil, and then polish it with a dry cloth, which will be more smooth as new. Every six months, lubricating oil can be used to lubricate the parts such as hardware rotation, sliding and locking points. After dripping into lubricating oil, it can be opened and closed repeatedly for 3-5 times to ensure complete lubrication and increase the flexibility and service life of hardware rotation mechanism.
(Image Source: Red oak doors and windows official website, invasion and deletion)
6. Aluminum-wood doors and windows in use, the action should be light, push and pull let nature take its course; If you find difficulties, don't pull and push hard, you should first troubleshoot the fault. Ash accumulation and deformation are the main reasons for aluminum-wood doors and windows push and pull difficulties. Keep the door frame clean, especially the push and pull groove clean. A vacuum cleaner can be used to remove wool tops of dust accumulated in the groove and door seal.
(Image Source: Red oak doors and windows official website, invasion and deletion)
A good aluminum-wood doors and windows, from material selection, production, detection to delivery, embodies the painstaking efforts and toil of the red oak door and window makers. They pour their feelings on the doors and windows, make doors and windows occupy an extremely important position in living environment and even architectural art. To do a good job of maintenance for aluminum-wood doors and windows and prolong the service life, on the other hand, it is also a gratitude to the craftsmen.
(Source: Red oak doors and windows official website, invasion and deletion)