How to install aluminum clad wood doors and windows?
1. Before installation, the installation personnel should carefully check the doors and windows according to the doors and windows table and make installation disclosure.
2. Before installation, measure the hole size and divide the positioning center line. If the hole is unqualified, it cannot be installed.
3. Aluminum clad wood doors and windows during the installation process, the doors and windows should be tightly bound, the Mat should be soft, the code should be placed orderly, and the phenomena such as bumping and scratching should be resolutely eliminated.
4. Place evenly to adjust wooden wedge, adjust the level and verticality of doors and windows, and control the tolerance at 1. Within 5mm/m.
5. Nail pipe screws or fixed patches must be installed at the 150mm distance between the four corners of the frame and the inner corner.
6. The interval between nail pipe screws or fixed patches in the frame shall not exceed 350mm, and the screws shall be evenly placed.
7. The gap between the window frame and the opening should be filled with pu Styrofoam.
8. After the Styrofoam is fixed, remove and adjust the wooden wedge, and fill the wooden wedge holes with Styrofoam.
9. After Styrofoam landline, play outdoor and indoor architectural seal glue evenly.
Aluminum clad wood doors and windows what are the installation specifications?
The so-called Aluminum clad wood doors and windows is the combination of solid wood doors and windows and aluminum alloy materials. It not only has the beautiful appearance of solid wood doors and windows, but also has the practical characteristics of metal. The perfect combination of the two creates aluminum clad wood doors and windows thermal insulation, strong and durable, sealed anacoustic features, so aluminum clad wood doors and windows is a hot product in the market. However, the editor reminds you that in addition to choosing, the installation specifications of aluminum clad wood doors and windows cannot be careless. We need to know about the following.
1. Doors and windows cannot be deformed
the door casement can be inserted into the door and window frame, which is consistent with each other. If the installation specification is large, the door aluminum clad wood doors and windows can be removed and re-planed. If it is not vertical, the gasket in the frame plate should be straight.
2. Beautiful appearance
the surface paint film has no quality defects, the color is harmonious, and the tree species should be the same.
3. Window and door sets must have basic materials
first fix the basal plate on the base keel of the window frame, then nail the lines, and then cover basal plate and trim board. If the side plate is knocked by hand, it means that there is no base plate on the bottom layer, it should be removed and redone.
4. The hinge position is correct
accurate location and firm installation. If the hinge is not straight, screw one screw on each hinge first, and then tighten all screws after the adjustment is correct. If the hinge screw is short or screw tightening, the appropriate screw should be replaced. When the screw is installed, it must be straight. The screw should be nailed in 1/3 first, and the rest should be screwed in.
The above is the knowledge explanation of how to install aluminum clad wood doors and windows and aluminum clad wood doors and windows installation specifications. I believe you will know more after reading it.
(Article Source: China Mendu network, invasion and deletion)