How to Clean Doors and Windows Quickly and Cleanly?


As the new year approaches, every household is busy cleaning. The floor and wardrobe are easy to clean. The most difficult thing is the doors and windows. The door is the first impression of the home. Whether the doors and windows are clean or not directly reflects the master's living habits. After cleaning the windows carefully, you will find that the home will be much brighter and the mood for the new year will be more comfortable. For the most "preconceived" doors and windows in the home, how can they be cleaned quickly and cleanly? Let's take a look. 1. Simple cleaning of glass and vinegar Whether it is bedroom windows, bathroom glass doors or kitchen sliding door, glass is everywhere in doors and windows. The door and window glass can be wiped and cleaned with a cloth stained with vinegar water; If the window is stained with oil, the glass can be sprayed with detergent first, and then pasted with plastic wrap to soften the solidified oil stain. After ten minutes, tear off the plastic wrap and wipe it with a damp cloth. Cleaning reminder: once the patterned frosted glass is dirty, you can use a toothbrush with detergent to wipe it in circles along the pattern. At the same time, put a rag under the toothbrush to prevent the sewage from dripping; in addition, when the glass is pasted with stickers by naughty children, the stickers can be carefully scraped off with blades, and then wiped with polish remover of nail polish to remove them all. 2nd Recruit aluminium windows timely repair and replacement After more than ten years of popularization, many urban families now use aluminium windows windows. The features of aluminium windows are smooth surface, bright appearance and convenient cleaning. Aluminium windows can be wiped with soft cloth with clean water or neutral detergent. Ordinary soap and washing powder cannot be used, and strong acid and alkali cleaners such as stain removing powder and toilet detergent cannot be used. Aluminium windows in the process of using, it should be turned on and off lightly, and the switch should go with the flow; If you find any difficulties, don't force them, and you should first eliminate the faults. Sealing wool tops and silicon sealant is the key to ensure the sealing, heat preservation and waterproof of aluminium windows. If it falls off, it should be repaired and replaced in time. Cleaning reminder: aluminium windows not only plays the role of increasing the light of the room, but also the guard to ensure the safety of the family. In addition to regular cleaning, the joint of the aluminum window frame wall should be checked frequently. If it is loose for a long time, the frame will be easily deformed and the window cannot be closed or sealed. Therefore, the screws at the joint should be tightened immediately, if the screw footing is loose, use epoxy strong glue to adjust a small amount of cement to seal. In addition, the tightening bolts, positioning axis, wind brace, floor spring, etc. should be checked frequently, and damaged parts should be replaced in time. For vulnerable parts of aluminium windows, lubricating oil should be added regularly to keep them clean and flexible. Third Recruit car window shade, hardware cleaning cannot be less Windows not only consist of window frames, but also include window glass, hardware and even car window shade. Therefore, when cleaning windows, these parts need to be cleaned. When car window shade of the windows are installed and cleaned, the car window shade of the windows must be removed first. Put the removed car window shade in the bathtub or next to the bathtub. Rinse gently with a soft water pipe or shower to remove spider web, dust and other dirt stuck on it; Secondly, hold some soap water in a bucket and soak some soap water with a short hair brush, then gently scrub the car window shade in a circle to ensure that the car window shade has been stained with enough soap foam; Finally, clean the soap with a soft hose or shower, and then wait for air drying. Cleaning reminder: hardware is also a very important part of the window. If the hardware is not clean and timely, causing rust and other conditions, it will seriously affect the normal opening and closing of the window. Therefore, it is necessary to pay attention to cleaning and maintenance at ordinary times to keep the hardware clean and bright. Daily use soft cloth to wipe away dust. For cleaning dead corners, you can use tools such as small brushes or toothpicks to clean them. Editor: China door and window network -- Taitai