When the window is not tightly sealed or greyed out, the window sealing strip solves these problems well. However, when we buy the window sealing strip, what are the technologies? In order to ensure the effect of the sealing strip, how to paste the window sealing strip is also skilled. The following furniture installer will introduce you the method of installing window seals and what aspects should be paid attention to when purchasing window seals.
I, how to paste the window seal?
1. Glass Mat and window sill device window frame and window frame, after cleaning the welding angle, special roller should be used to press the strip in the correct surface direction, and gently push the strip into the groove of the profile, and press the head of the strip into the configuration file embedded in the slot. Since rubber strip is an elastomer, it may retract after rolling, the correct way to install the window sealing strip is to retract the end of the strip back to the center when the strip device is connected to the end, leave 2 edges shortened by 3cm, and then cut into the embedded slot.
2. Micro glass bead device, according to the correct surface through a manual method to insert the strip into the contour groove, and then press the strip into the gap between the glass and the contour by pressing the outer surface of the strip, the strips at both ends are retracted back to the center, leaving a length of 1-2cm, then cut and pressed into the notch.
II, how to choose window sealing strip?
1. Check the appearance of the profile and the window sealing strip, wrap the sealing strip around the profile as closely as possible, and place it at high temperature (the roof or the sun is enough) for a period of time, check whether the contact surface between the profile and the sealing strip will be soiled and discolored, and whether there is dust and butter on the outside of the sealing strip, whether it is dirty hands.
2. Use your nose to smell the window sealing strip. If there is any smell, please use your nose to smell it. The ordinary PVC material has a little mellow smell and almost no smell.
3. Depending on the proportion, many manufacturers use a large amount of filler in the application of filler. In order to seek a larger output value, using coarse Whiting and talc powder as filler greatly increases the proportion of window sealing strip products, therefore, the cost is increased invisibly. Take a coarse Whiting seal and stretch it back and forth by hand for several times. A small amount of white powder will appear outside.
4. Look at the window sealing strip packing. For some relatively cheap sealing strips, many packing materials are not very bright in appearance, which is undesirable.
The details must not be ignored for decoration events. Window sealing strip is definitely one of the important details. No matter the new house or the second-hand house, the existing adhesive tape will be unqualified or aging. When decorating, remember to replace the adhesive tape with a new one. The price of adhesive tape is not expensive, don't lose it because of small size. How to paste the window sealing strip is introduced here. Everyone should have a certain understanding of installing the window sealing strip.
