Windows are the face of the house. Whether it is the owners who buy new houses, second-hand houses or are going to renovate the house, they are very concerned about the problem of windows. Why do so many owners consider replacing windows for decoration?
Poor function, unable to meet the requirements of thermal insulation and noise reduction
Most of the existing old doors and windows of buildings have only basic functions of preventing wind and rain, and the functions of heat preservation, heat insulation and sound insulation cannot be guaranteed. Although the doors and windows of newly-built buildings are better than those of old houses, they are far from the ideal standard. However, most doors and windows do not have the functions of energy saving, anti-theft, anti-harmful ultraviolet rays, and removing haze and fresh air provided by modern system doors and windows, such doors and windows seriously affect the quality of life of owners and even bring troubles to family life. If such doors and windows are not replaced during decoration, they will be replaced after check-in, and the cost will be higher.
For the demand of decondensate (water mist)
Especially in the north, it is easy to fog on the glass in cold winter, because the glass temperature is relatively low (the outdoor temperature is relatively low) and the indoor temperature is relatively high, the water vapor in the indoor hot air condenses when it meets the cold glass, forming tiny water droplets. Very tiny water droplets will form water mist on the glass window, such a long accumulation of large amounts of water droplets will cause moldy walls.
Thin profile, poor ability to fight natural disasters
In order to save costs, doors and windows used in some low-grade residential areas are mostly made of ordinary building profiles. Such materials are resistant to wind pressure difference and are easily deformed and damaged when blown by strong winds.
Cheap accessories, easy to rust and break, causing danger
It is also because of the cost that the accessories of doors and windows of commercial housing are generally cheaper accessories, which are poor in hand feeling, poor in quality, easy to rust and break, and easy to cause danger.
Construction protection measures are not in place and difficult to clean
The original doors and windows are not properly protected during civil construction, resulting in scratches and mud falling, which is difficult to repair and clean, affecting the beauty and use of doors and windows.
Non-standard water seepage
Commercial housing doors and windows for cost control, the material itself is not too good, coupled with the uneven level of installation workers, operation is not standardized, such as in the corner and splicing place did not use sealant tight, or the sealing glue is not sealed well, it is easy to cause leakage hidden danger.
The color is dull, and the style is not suitable
The color of the original doors and windows is basically single tone (sand gray, brown, green, etc.), which is difficult to match with the home color system, and its style is also difficult to match with the modern home style.
As for what window to choose, there is a lot of knowledge. The overall requirements are: plastic steel, broken bridge aluminum, and wooden profiles are OK, which depends on the conditions of the home. There are also many glass products. Firstly, we should choose those with heat insulation, heat preservation, noise reduction and energy saving functions. Secondly, we should choose those with safety protection, condensate removal and UV protection functions, third, choose long life (at least 15 to 30 years). Whether it is profiles or glass, we must choose manufacturers and installers with strong technical ability, high technology content, excellent brand and good after-sales service, don't look for "Beach bargains" again.
Editor: China door and window network -- Taitai
