Sliding door is a commonly used door in the family, which refers to a door that can be pushed and pulled. With the development of technology and the diversification of decoration methods, sliding door from traditional plate surface to glass, fabric, rattan, aluminum alloy profiles, from sliding door, folding door to partition door, the functions and usage range of sliding door are constantly expanding.
Hanging rail sliding door is sliding door of the popular types in recent years and is also widely used in kitchens. Today, the editor brought you the kitchen sliding door, how to remove the hanging rail sliding door?
Kitchen hanging rail sliding door removal method introduction
first of all, the disassembly of the hanging rail sliding door is step-by-step. The hanging rail sliding door has two installation methods: open installation and concealed installation. If you look carefully, you can find that there is a hanging wheel insert on each side of the door, as long as you scratch off the decorative skin on the side, you can obviously feel the position of the insert. Is this the removal? The key of hanging rail sliding door.
Both sides of the open-mounted hanging rail sliding door door can be disassembled. If it is concealed, one side can only be removed first, and the inserts and the side of the door are flat, lift the door and pull the door out while turning the door out. If the hanging rail sliding door gets stuck, it will be difficult to disassemble. Be patient, but be careful, do not scratch the edges and corners, and do not damage other parts.
The next step is to disassemble the hanging rail of the hanging rail sliding door, inspect the parts of the hanging rail sliding door one by one, and then install the steel cap used to fix the hanging rail at the top plate of the wooden frame, then remove the hanging rail on the board, then install the pulley and cover plate in the top rail, and finally install the hanging card to make appropriate horizontal adjustment until the level of the hanging rail sliding door reaches the requirement.
Generally, the sliding door size of the installation upper part of the hanging rail track box should be kept between 12cm and 9cm. Only the hanging rail sliding door with the size conforming to the specification can be guaranteed not to fall off after installation, when disassembling the hanging rail sliding door, attention should be paid to ensure that the width of the two doors must be the same. The door with better quality needs to be selected before disassembling, in this way, the usage time can be extended for a long time.
Kitchen hanging rail sliding door precautions for removal
there are many precautions for the disassembly of the hanging rail sliding door. First, when removing the hanging rail sliding door, check the installation method and safe use of the hanging rail sliding door to determine whether the hanging rail sliding door can be disassembled, at the same time of disassembly, pay attention to the control of noise, so as not to disturb other people around.
Lifting rail sliding door disassembly diagram
in the kitchen sliding door, how to remove the hanging rail sliding door is introduced here. If you need to repair or clean the kitchen hanging rail sliding door at home, you can try the above operation methods, but be sure to pay attention to safety. There should be someone who can help you when you dismantle it.
