Aluminum Alloy swing gate opener is a kind of home door that is in great demand in the market now. The structure is relatively simple, waterproof and easy to take care of. Shower door is usually used in home life. Do you know the correct way to choose flat doors? Do you know the correct installation method and precautions of vertical hinged door?
How to choose aluminum alloy swing gate opener material?
Vertical hinged door aluminum alloy profiles are selected, and aluminum alloy profiles are divided into manganese magnalium, titanium and magnesium magnalium, aluminum magnalium, etc. Manganese magnalium and titanium and magnesium magnalium are higher than aluminum magnalium profiles, with high density and filial piety.
The best choice is to use aerospace silicon magnesium aluminum alloy aluminum, aluminum containing silicon magnesium copper manganese iron chromium zinc titanium and other rare metal elements, silicon magnesium and other rare metals improve the hardness, gloss and toughness of aluminum, the tensile strength of aluminum is greater than or equal to 160Mpa, the yield strength is greater than or equal to 110Map, the elongation is greater than or equal to 8%, and the hardness is greater than or equal to 58HV. The surface of the aluminum material adopts Italian three-dimensional spray drawing or carbon craft, the material is oxide film full and smooth, the molding marks are less than 0.01mm, the aluminum wood grain is clear and realistic, the sun protection does not fade, the workmanship is fine and smooth, the color life of aluminum is more than ten years.
How to choose aluminum alloy swing gate opener?
1. There should be no obvious damage on the decorative surface of doors and windows, which means that the protective film on the surface of doors and windows should not have scratch marks.
2. There should be no obvious chromatic aberration on the colored surface of adjacent components on doors and windows.
3. There should be no aluminum chips, burrs, oil spots or other stains on the surface of doors and windows, and there should be no overflowing adhesive at the assembly joint.
4. Identification of LOGO-regular manufacturers will have their own LOGO, such as LOGO.
How to install aluminum alloy swing gate opener?
1. Open the package carefully, take out the locks, and check whether the products and accessories are intact.
2. Open the lock bolt, rotate the door leaf and the door frame into a vertical angle, take out the door leaf upward and put it away.
3. Fold the connection aluminum strip below the door frame and turn the fixing pieces on both sides of the door frame to the suitable installation position.
4. Install the lock and adjust it until the switch is free and the seal is standard.
5. Push the door frame into the door hole from the front of the door hole to determine the front and rear positions of the door frame.
6. Pay special attention to vertical hinged door. Before installation, horizontal ruler must be used to adjust the flatness and verticality of the door frame to adjust the opening distance of the door leaf between the door lock frame and the door hinge frame.
7. Vertical hinged door after the installation is confirmed that there is no problem in adjusting the size, fix the door frame fixing piece on the wall.
8. Insert the door leaf into the split hinge of the door frame again and check whether the opening of the door leaf is smooth and firm.
Precautions
1. The assembly vertical hinged door should pay attention to the assembly quality, the joint should be flat, and the splicing frame fan should not be split, and the angle should not be broken.
2. The surface layer is polluted and bit color, and the finished product protection is not paid attention to during construction, and the cleaning is not carried out in time.
3. Surface scratches should be strictly prevented from cleaning the surface dirt with hard objects.
4. The glass cutting size is not well mastered. The size is not measured according to the actual object. After cutting, it does not meet the installation requirements. It is too large or too small.
5. If the mortar and sundries in the slot are not cleaned up, the cleaning should be carefully controlled. Glass is not allowed without inspection.
6. Nylon wool tops and rubber strip are lost or the length is not in place. The sealing material should be selected according to the design requirements, and should be reloaded in time after being lost.
7. The selection of rubber layering is inappropriate, resulting in poor sealing effect. Sealing rubber strip is easy to detach at the corner. Glue should be brushed under the sealing strip to make it firmly combined with glass and frame fan.
8. The glass is not cleaned up or cracked. After the glass is installed, clean it with soft cloth or cotton silk in time to achieve transparency and brightness. If the cracked glass is found, replace it in time.
