Broken Bridge aluminium windows is based on the old aluminium windows to improve
improved insulation performance of doors and windows. The principle of broken bridge type aluminium windows is to use PA66 nylon to separate and closely connect the indoor and outdoor aluminum alloy into a whole, forming a new heat insulation aluminum profile. What are the maintenance methods of broken bridge aluminium windows?
Maintenance method of broken bridge aluminium windows
1. Always check the wall joint of the bridge-cutoff aluminum alloy window frame. If any signs of looseness are found, adjust it in time. If the screw is loose, tighten it immediately. If the base of the solid screw is loose, you can use epoxy strong glue to transfer a small amount of cement to seal it.
2. When cleaning the broken bridge aluminium windows, ordinary soap and washing powder should not be used, and strong acid and alkali cleaners such as stain removing powder and toilet detergent should not be used. You can choose to wipe it with soft cloth with clean water or neutral detergent.
3 , sealing wool tops and silicon sealant are to ensure aluminium windows sealing of broken bridge, the key to heat preservation and waterproof, if there is any sign of falling off, it should be repaired and replaced in time.
4. In the process of using the broken bridge aluminium windows, push and pull lightly, push and pull should let nature take its course; Do not force it if you find difficulties, and eliminate the faults first. Ash accumulation and deformation are the main reasons for the difficulty of sliding and pulling aluminum alloy doors and windows, which requires keeping the door frame clean, especially the sliding groove clean. A vacuum cleaner can be used to remove wool tops of dust accumulated in the groove and door seal.
5. After the rain, clean the water stains on the glass and door frame in time, and pay special attention to sliding chute water accumulation. Sliding chute after long use, the friction force will increase. You can add some oil or apply a layer of fire wax oil.
6. When cleaning the broken bridge aluminium windows, do not step on the aluminum frame or use the frame as a support.
Aluminium windows maintenance methods of broken bridges should be paid a little attention both in cleaning and daily use, so that our broken bridge aluminium windows can be under our care, to protect the warmth and comfort of our home for a longer time.
