Part1: aluminium windows installation requirements
1, clean without scratches
the surface of aluminum alloy doors and windows is clean, without scratches, bumps and rusts; The surface of the glue coating is smooth and flat, with uniform thickness and no air holes.
2. Fill the gap
aluminum Alloy the gap between the door and window frame and the wall is filled with full and dense, the surface is smooth and smooth without cracks, and fill plug materials and methods meet the design requirements.
3. Door and window frame
the length difference between the two diagonal lines of the door and window frame, the verticality, levelness and horizontal frame mark of the door and window frame, etc. shall not exceed the specification requirements.
Part2: aluminium windows Installation FAQ
1. Material defects
there are defects in the structural design or profile selection of aluminum doors and windows.
2. Improper connection
the connection position between aluminum doors and windows and the wall at the opening is fill plug seal improper.
3, architectural structure problems
the building structure or structure itself has defects.
4, insufficient workmanship
aluminum doors and windows cannot meet the quality requirements in the process of processing and manufacturing.
5, auxiliary materials
the material of aluminum doors and windows auxiliary materials is unqualified.
In home decoration, when installing aluminium windows, doors and windows should be tightly closed, the gap should be uniform, the switch should be flexible, the accessories are complete, and the installation position is correct. Only in this way can their respective functions be achieved, correct and beautiful effect.
(Source of the article: decorate the house on today's headlines, invasion and deletion)