Many users will feel that
broken bridge aluminum doors and windows there is no need to maintain it, just wipe it with a towel during the holidays. Roland Sini told everyone that this idea was wrong.
Broken bridge aluminum doors and windows daily maintenance is very important. The proper maintenance of doors and windows can take decades. If the maintenance is improper, it may have to be replaced for more than ten years. Next, Roland Sini will tell you how to maintain it.
Broken bridge aluminum doors and windows.
One thing to note is that when we go to clean
broken bridge aluminum doors and windows remember not to step on the door and window frame, nor can it be used
broken bridge aluminum doors and windows the structure supports the body, because the weight of the body will make the door and window frame deformed, damaged and even unusable.
II,
broken bridge aluminum doors and windows in the process of use, it should be opened and closed lightly, and the opening and closing should be let the natural flow. If you find any difficulty, don't force it. Troubleshoot the fault first. Dust accumulation, stains and deformation are the main reasons for the difficulty of opening and closing aluminum alloy doors and windows. Keep the door frame clean, especially the groove clean. A vacuum cleaner can be used to remove wool tops of dust accumulated in the groove and door seal. You can use wet towel to clean the stains. If the stains are not cleaned, you can also use neutral detergent to clean them. Remember that you cannot use strong acid and alkaline detergent, because this will cause the chemical action inside the detergent to react to the doors and windows, thus corroding the doors and windows.
3. When it rains, the rain will fall into the groove. Some users think that this situation only needs to be dried after the sun comes out, and it also saves time to clean up. But in fact, this practice will shorten the service life of doors and windows by more than half. Because the acid contained in the rain is relatively large, if the rain on the doors and windows remains and is not cleaned for a long time, the doors and windows will change due to the corrosion of the rain. Not only will the top turn yellow and become unattractive, but it will also cause the opening and closing of doors and windows to become dull and inflexible. Therefore, after rainy days, we should clean up the rainwater on the doors and windows in time to prevent it from remaining. At the same time, you can also apply a layer of oil or a layer of fire wax on the doors and windows, which is equivalent to adding a protective film to the doors and windows.
IV. Regular inspection
broken bridge aluminum doors and windows at the junction of the frame wall, if it is loose for a long time, it is easy to deform the frame as a whole, making the doors and windows unable to be sealed and closed. Therefore, the screw at the joint should be tightened immediately. If the screw footing is loose, use epoxy strong glue to adjust a small amount of cement to seal.
Five, do three checks:
Sealant strip is guaranteed
broken bridge aluminum doors and windows the key to sealing, heat preservation and waterproof should be repaired and replaced in time if it falls off.
Check frequently
broken bridge aluminum doors and windows at the junction of the frame wall, if it is loose, it is easy to deform the frame as a whole, making the doors and windows unable to be closed and sealed. Therefore, the screw at the joint should be tightened immediately. If the screw footing is loose, use epoxy strong glue to adjust a small amount of cement to seal.
Always check the tightening bolts, positioning axis, wind brace, floor spring, etc., and replace damaged parts and vulnerable parts of aluminum alloy doors and windows in time. Add lubricating oil regularly to keep it clean and flexible.
Edit: doors and windows online-berries
