I. Aluminium wraping wooden window Maintenance precautions
1, anti-over-drying cracking
wooden window the moisture content of the factory is 12±3, which can ensure the strength and stability of the wood. In normal household life, such humidity can basically guarantee. However, when the decoration is uninhabited, it is necessary to pay attention to sprinkling water regularly indoors to maintain humidity and prevent the environment from cracking over-drying wood.
2, anti-scratch
during the decoration period, wooden window should be protected to avoid blunt force injury or sharp tool scratching the wood surface and outer aluminum surface, including handle and hardware buckle cover.
When there are dirt or glue on the glass surface, avoid polishing with hard objects such as wire brush and steel wire ball, and wipe away with soft objects such as rubber and towel slowly to avoid scratching the glass surface and affecting the visual effect.
3, anti-chemical erosion
during the interior decoration period, we should try our best to ensure the integrity of the protective film and prevent all kinds of glues and cement mortar from eroding the paint surface. When there is sticky dyeing, wipe it with a clean towel at the first time, and do not wipe it with chemical solvents such as alcohol and thinners to avoid causing greater damage;
after the outdoor construction is completed, the outer aluminum protective film should be removed at the first time to avoid oxidation of the protective film under long-term sunlight irradiation, and it is not easy to remove in the later stage. The protective film should be removed at the first time after the basic interior decoration is completed, so as to prevent the protective film from being separated easily if the time is too long.
4. High-temperature resistant burn
aluminum clad wood doors and windows avoid contact with high temperature objects such as open flame, which is easy to burn wood surface, aluminum surface paint, and even damage wood Aluminum connecting buckle.
5, pay attention to waterproof soaking
the characteristic of wood is dry shrinkage and wet rise. In the process of construction, it is necessary to avoid the situation of being soaked by water. Because aluminium wraping wooden window adopts environmentally friendly and open wooden window water-based paint for wood ware, it is even more difficult for wooden window to be immersion in water for a long time. If the above situation occurs, the accumulated water should be wiped off in time, and the ventilation should be slow and dry.
To adjust indoor humidity in time, the best solution is Ventilation. Several windows can be opened for ventilation in winter in the north. Try to use a flat and fast ventilation method. Do not use a long-time tilting method for ventilation, prevent frost and icing, affecting normal opening and closing; In the rainy season in the south, the dehumidification function of the air conditioner can be turned on to reduce indoor humidity.
6. Sand-proof grinding
in the process of interior decoration, sand and gravel will enter the middle of hardware or rubber strip in the window construction, and will not be cleaned up in time. Sand and gravel will grind hardware and rubber strip, resulting in window failure to close normally or rubber strip wear, affect the sealing effect of the whole window. Therefore, in the construction, attention should be paid to avoid sand and gravel entering between wooden window frames. Once entering, it should be cleaned in time with a brush or vacuum cleaner.
7, defense misoperation
aluminium wraping wooden window hardware basically has the function of tilting and opening. In the process of use, pay attention to that when switching between the two opening modes, close it completely first and then open it in one way, if you switch the opening mode without completely closing, the hardware will be damaged and cannot be closed.
In addition, during the normal use of the window, the tightness of the window hardware will also change slightly. When it is found that it is difficult to open or close, the hardware needs to be adjusted. If it cannot be completed by itself, you can find professionals to handle it.
2. Aluminum clad wood doors and windows price
most consumers are still a bit luxurious, but it is also a manifestation of high taste. But I believe that with the progress of Living Water and Science and Technology, aluminum clad wood doors and windows will be popularized in every family one day.
In general, the retail price of standard pure solid wood window is 3,000 yuan or more per square meter. The price of special-shaped products needs to be increased by several hundred yuan, while the price of aluminum clad wood doors and windows is 3100-3400 yuan per square meter.
In addition, it depends on its specifications, color, style, etc., which also affect the price of aluminium wraping wooden window. Of course, additional labor costs are needed. Therefore, the price of aluminum clad wood doors and windows does not have a fixed value. The specific price is subject to your actual purchase and installation price.