First, opening and closing block
when opening and closing aluminum alloy doors and windows, there will be a blocking situation, and we need to spend a lot of effort when switching, in addition, the overlapping width of the frame fan is small and the surrounding gap is uneven, which is basically due to the deformation of the door frame or fan, loose sealing strip, flower fall or damage of hardware accessories, if the installation quality difference exceeds the allowable deviation, how can we rectify it?
(Image Source: obaolai door industry official website, invasion and deletion)
rectification measures:
1. The installation process must be met during installation, and the installation quality of each process must be checked and adjusted at any time to ensure that it meets the relevant deviation requirements of installation.
2. Doors, windows and window holes need to draw the center line. When the window frame is loaded into the hole, the center line must be aligned. The frame angle needs to be temporarily fixed. The verticality and levelness of the window frame need to be carefully adjusted, level and square trowel, ensure that each installation must be within the allowable deviation range.
3. Before entering the frame, we also need to check the diagonal and straightness deviation. After entering the frame, we need to check the overlapping width and gap with steel ruler and so on until the best requirements are met.
4. Hardware components need to be installed correctly. We need to replace them in time after damage is found so as to better ensure stable use.
5, usually need to do door and window protection and maintenance work, to prevent some influence of external force, remember not to hang heavy objects, otherwise it is easy to cause deformation, gently open when using, maximize its function and prolong the service life of doors and windows.
(Image Source: obaolai door industry official website, invasion and deletion)
second, damage occurs
hardware accessories can be said to be the most important part of aluminum alloy doors and windows. Due to their frequent use, some problems will occur slowly, and the damage is mainly due to the weak fixing of hardware accessories, damage to pulley or dagger hinge. The main reason for these damages is improper selection or poor quality, or there is no metal lining plate and insufficient installation strength during imprisonment.
So, what if rectification is carried out?
1. When selecting hardware accessories, the model, performance and specifications are required to meet the requirements of national standards to ensure that the selected accessories are matched with doors and windows to ensure better use.
2. For doors and windows with a width of more than 1mm or double-layer glass, choose double pulley or rolling pulley, which can avoid the unsmooth push and pull situation caused by too long use time.
3. For hardware accessories, they should be installed at the end until the combination of lock, handle and so on. Only after the installation is completed can they ensure the normal position and better ensure the flexibility of the switch.
For aluminum alloy doors and windows, how to solve the problems such as unsmooth push and pull and lax closing. I believe everyone has a certain understanding. Paying more attention to these modification measures can help us avoid a lot of troubles and better ensure the smooth operation of aluminium alloy sliding door.
(Article Source: obaolai door industry official website, invasion and deletion)