How to Maintain Aluminum Alloy Doors and Windows in Hot Summer? Aichen to Guide You

It has reached the dog days, and the summer heat has reached its peak. In rainy season and humid summer, we should also pay attention to the maintenance of household goods, otherwise their life will be affected. Aluminum alloy doors and windows are useful to many families. Maybe many people are not very clear about how to maintain it well. Now I 'd like to introduce how to maintain aluminum alloy doors and windows in summer. 1 light pull light close First of all, when using aluminum alloy doors and windows normally, we should pay more attention to it and gently pull it off to make aluminum alloy doors and windows naturally pull together. In addition, aluminum alloy doors and windows are likely to be difficult to push and pull aluminum alloy doors and windows due to dust accumulation or deformation, therefore, the doors and windows should be cleaned in time, especially the push-pull groove. Use a vacuum cleaner to clean up the dust accumulation wool tops inside the groove and the door seal. 2 Special cleaning When cleaning aluminum alloy doors and windows, use soft cloth, clean water or neutral detergent instead of ordinary soap, washing powder, stain removing powder, strong acid and alkaline detergent, and toilet cleaner cannot be used. 3 Cleaning after rain After rainy days, dry the glass and window frames of aluminum alloy doors and windows, and then dry the water within sliding chute. After using for a long time, the friction force of sliding chute will increase. At this time, you can add some oil or apply a layer of fire wax oil. 4 sealing reinforcement Seal wool tops and silicon sealant of aluminum alloy doors and windows should be checked in time, and repaired immediately when falling off. The joint of aluminum alloy frame and the wall is easy to loosen or the frame is deformed after a long time of use, so the loose screws at the joint should be reinforced, when the screw footing is loose, a small amount of cement needs to be fixed with epoxy strong glue. 5 accessories inspection The connection parts of aluminum alloy frame should be checked frequently, bolts should be tightened timely, and damaged parts should be replaced. Locate vulnerable parts of aluminum alloy doors and windows such as shaft pin, wind brace, and floor spring, and check them frequently. Add lubricating oil regularly to keep them clean and flexible. 6 frame sealing Often check the joint of the aluminum alloy frame wall. If it is loose for a long time, it will easily deform the frame as a whole, making the doors and windows unable to be closed and sealed. Therefore, the screw at the joint should be tightened immediately. If the screw footing is loose, use epoxy strong glue to adjust a small amount of cement to seal. [This article is reprinted from The Aichen public account. Only information is transmitted. Please contact us to delete the infringement]] Edit: doors and windows online-Yanzi