aluminum alloy doors and windows will introduce the installation method of aluminum alloy swing gate opener. If you are worried about installing aluminum alloy swing gate opener recently, come and have a look!
Aluminum Alloy swing gate opener Main components
door frame part: used for frame edge profiles around the door frame and other profiles of the door frame.
Vertical hinged door hardware: door handle, fastening parts, etc.
The door frame and wall connecting parts: Aluminum Angle profile with a thickness of about 2mm also need screws of specific specifications. Top ten brands of doors and windows doors and windows are also important components of architectural modeling, so their shape, size, proportion, arrangement, color and modeling have a great influence on the overall modeling of buildings.
Vertical hinged door glass material: it is better to use 3mm thick double-layer glass. Aluminum alloy doors and windows are classified by material: wooden doors and windows, steel doors and windows, revolving door security door, automatic door, plastic doors and windows, revolving door, iron flower doors and windows, plastic steel doors and windows, stainless steel doors and windows, aluminum alloy doors and windows, FRP doors and windows, aluminum wood composite doors and windows, etc.
Aluminum Alloy swing gate opener installation method
after we have prepared the above materials, we can start the installation of the door. First, we use the bullet line to find rules, and then deal with the hole of the door, after finding it, bury the connecting iron in the hole. At this time, we will open the purchased aluminum alloy swing gate opener and carry out unpacking inspection, and put it in the required place according to the drawing number. After that, we will check whether the protective film of aluminum alloy is punctured, and then install it aluminium alloy door. At this time, fill some insulation materials in the caulking around the door and clean the sundries. After that, we will install hardware accessories on aluminum alloy swing gate opener, and then install the sealing strip of the door. If there are other needs, we can also install glass materials. Here, Foshan aluminum alloy doors and windows will tell you more about the installation position of wall thickness. The best installation position is based on the size on the drawing and the width of the platen. If there is any deviation, in principle, the exposed size on sill plate should be the same.
Aluminum Alloy swing gate opener anti-corrosion treatment
if iron parts are used for fixing when aluminum alloy swing gate opener is installed, anti-corrosion treatment should be carried out. The connectors are preferably made of stainless steel. Red oak doors and windows factory doors and windows include steel doors and windows, aluminum alloy doors and windows, copper doors and windows, plastic doors and windows, steel-plastic co-extruded doors and windows, wood doors and windows and extruded Wood-plastic composite doors and windows. Secondly, aluminum alloy swing gate opener the anti-corrosion treatment on both sides of the door frame should be carried out according to the design requirements. If there is no design requirements, the anti-corrosion materials should be painted, rubber materials and so on can be used.
