Aluminum Alloy door and window materials greatly reduce the strength of balcony doors and windows. Therefore, the next editor will introduce the acceptance of balcony doors and windows and the matters needing attention in balcony doors and windows decoration.
Balcony doors and windows acceptance
1. When designing balcony doors and windows, it must be reasonable. Do not use large casement on the top of the balcony to save materials. Be sure to install 430mm to 530mm fixed window on it again lower than 1100mm, 1200mm sliding window installation, and the sliding window cannot be too wide.
2. The window frame pressure of balcony doors and windows cannot be too large. Generally, the closed balcony doors and windows do not use zinc steel balcony fence, and the open window uses Zinc steel balcony railings.
3. The sliding path of balcony doors and windows should be indoors to avoid rainwater leakage outside. The gap between balcony doors and windows should be filled with cement mortar.
4. The windows and frames of balcony doors and windows should be fixed firmly. After fixing, cement nails should be used to fix them, and then the angle steel should be reinforced with paint. It cannot be fixed on brick walls, let alone Wood and counter-bar gun nail fixture frame instead of wedge-shaped.
5. The aluminum hardness of the railing window of balcony doors and windows must conform to the standard. Do not use it if the material is relatively soft.
Precautions for balcony door and window decoration
1. The decoration quality of balcony doors and windows is the key to determine whether they can carry the typhoon safely. Therefore, the quality and sealing of doors and windows should be very good, and the waterproof frame should not be mistaken outward.
2. Components of balcony doors and windows should meet the quality standards. Components of balcony doors and windows should be made of stainless steel or galvanized zero accessories. If plastic doors and windows are used, they must be nailed well and drilled first, direct hammering is prohibited.
3. The installation of balcony doors and windows must be firm, and the appearance cannot be deformed or broken. The sealant used for the slot outside the gap is strict, the surface is smooth and smooth without cracks, and the anti-corrosion treatment must meet the requirements of relevant regulations.
4. If the enclosed balcony should be installed with aluminum alloy or plastic steel windows along the mouth, the iron handrail of the window balcony should not be too dense. When handing over the house, some special parts have been installed by the builder.
Note: This article is reproduced from the internet and does not represent the platform's position. It is for readers' reference only. The copyright belongs to the original creator. We share this article for the purpose of spreading more information. If there is any infringement, please leave a message in the background to contact us for deletion, thank you!
