(Image Source: rocabo doors and windows official website, invasion and deletion)
aluminum-wood doors and windows qualified or not
1. Generally, in the design drawings of houses, the lines of the qualified window frame are generally smooth, and the overall color is very uniform, without a large degree of color difference. In addition, the surface is also very smooth, it will make people look very classy.
2. Hardware that can support heavy strength must be adopted in the structure. It must be smooth to open or close, and the interface must be very firm, however, the assembly of materials cannot show any signs of looseness at all, and it must be easy to operate on or off.
3. The rubber strip should be completely airtight, but at the same time it should be able to shrink, and it should not be too easy to age, therefore, generally, when considering the design drawings of houses, we suggest to use sealant with better quality and more EPDM. In addition, the Corner junction of the window must be firm, the lines should be straight, and it is better to use angle glue inside, which will be more firmly stuck and less prone to gaps.
4. In the treatment of the layering, the glass layering on the window and the wooden layering must not have too much gap when they are installed. Generally speaking, they need to be within 0.5mm, it looks flat on the whole. The aluminum strip of the periphery must be flat at a corner of 45 degrees, and the gap should generally not be greater than 0.5mm. In order to make sure that it is firm, you need to use aluminum angle codes and several rental antler slices at the corner. Pay special attention not to use plastic decoding and those inferior nylon angle codes.
Door and window design in interior design solid wood doors and windows are still Aluminum clad wood doors and windows, and glass layering must be properly selected and practical.
In this way, the installation and disassembly will be much more flexible and convenient for future replacement and maintenance. In short, do not use a combined dead layering for the frame of the wall and doors and windows.