for enterprises with wooden doors and windows, one end of the aluminum-wood doors and windows side of aluminum frame materials is flush with the wooden frame material, the inner surface of the other end is opposite to the outdoor side of the glass, and the part of the aluminum frame materials side is opposite to the glass is exposed to the wall, other parts are installed in the wall. Fiberglass section the current products have only one cavity structure, and the thermal insulation performance is limited. This type of doors and windows has not been popularized in the domestic application or initial stage.
Aluminum clad wood doors and windows is reserved for pure on the premise of the characteristics and functions of solid wood doors and windows, the frame is formed by combining the aluminum alloy profile and solid wood through mechanical methods. The two materials are connected by polymer nylon pieces, which fully takes care of the different properties of wood and metal shrinkage coefficients.
Aluminum-wood doors and windows installation requirements:
1. Beautiful appearance
aluminum-wood doors and windows the surface paint film has no quality defects, the color is coordinated, and the tree species should be the same.
2. Do not deform doors and windows
aluminum wooden door casement can be inserted into the door and window frame, and it is consistent. If the gap is large, the door casement can be removed and re-planed. If it is not vertical, the gasket in the frame plate should be straight.
3. The hinge location is correct
aluminum-wood doors and windows the location is accurate and the installation is firm. If the hinge is not straight, twist the next screw on any hinge first, and then tighten all screws after the adjustment is correct. If the hinge screw is short or screw tightening, the appropriate screw should be replaced. The screw must be straight when it is installed. The screw should be nailed in 1/3 first, and the others should be screwed in.
4. Window and door sets must have basic materials
aluminum-wood doors and windows fix the basal plate on the base keel of the window frame first, then nail the lines, and then replace all basal plate and trim board. If you tap the side plate with your hand and make a sound, analyze that there is no base plate on the bottom layer, and you should remove and redo it.
Can really effectively achieve indoor comfort effect, the third type of aluminum alloy doors and windows is aluminum alloy doors and windows. Before our country's building energy conservation code, it was popular or ordinary aluminum alloy doors and windows. This kind of doors and windows are roughly framed fan materials of cavity-type aluminum alloy structure, poor thermal insulation performance. With advanced aluminum-wood doors and windows manufacturing equipment and rich experience in setting up and manufacturing, the company can provide customers with special business planning. Aluminum-wood doors and windows is especially popular in the market, all the advantages it has are that it can improve the cost performance of our purchase and make our aluminum-wood doors and windows products have quite good effects.
