doors and windows are beautiful and elegant ~ doors and windows can be matched with large-area glass, which not only has strong lighting ability, but also has a sense of hierarchy, but also can highlight the grade and create a comfortable atmosphere. Although there are many advantages of aluminum alloy doors and windows, its actual use is closely related to the installation method, so when installing doors and windows, everyone should pay more attention to it. So, what should we pay attention to when installing aluminum alloy doors and windows? Let's follow the new Hausen doors and windows.
Before installing aluminum alloy doors and windows, we should test and assemble the doors and windows according to the shape and position of the doors and windows in the construction effect diagram to adjust them. Only after they are correct can they be installed. Check whether the embedded concrete is sufficient and the location is accurate. First install long vertical splicing materials (materials used to connect two single window frames), then install sectional horizontal splicing materials, and finally the door and window frames.
After the indoor and outdoor wet operations such as painting can be completed, the installation of aluminum alloy doors and windows doors and window frames can be carried out. The civil construction party should print a perpendicular line of doors and windows, horizontal lines and inlet and outlet lines before installation, and also provide the main lightning protection connection points, so as to facilitate the connection between aluminum alloy doors and windows and engineering lightning protection system.
The joints between the wall interface and the door and window opening should be straight and correctly opposite. After the device is trim board pasted, you can use the foot line to close the mouth, and then carry out joint treatment at the horizontal and vertical interface. The gap filling and embedding treatment should be carried out between the frame and the wall. In addition to meeting the requirements, the plug joint should be full and no gap should be left.
Doors and windows should be placed horizontally and vertically when they are installed in the hole, and the components and installation distance at the elastic connection between the hole and the outer frame should meet the requirements. Connecting components should be treated by galvanizing and other processes. When the connection between embedded parts and wall is arranged inside and outside, it is better to install connecting parts on the lock position. Fixing methods include welding, fastener fixing, etc.
After installing doors and windows, check whether the components of each part are intact, whether the installation is firm, and whether the doors and windows Casement are open and closed freely. Clean up the protection sticky tape, packaging plastic, construction debris and other sundries on the frame fan and slot. And clean doors and windows, do not use corrosive cleaners and hard objects to clean, so as not to damage the surface paint film.
The above are the precautions for installing aluminum alloy doors and windows. I hope I can help you.
