what about the normal use of doors and windows?
1. It can be wiped with soft cloth with clean water or neutral detergent. Washing powder and ordinary soap should not be used, and strong acidic cleaners such as stain removing powder and toilet cleaner should be avoided, contact with corrosive substances such as salt. In addition, it should be noted that when cleaning, people should not step on the aluminum frame or use pushing and pulling frame to support it.
2. When pushing and pulling, the action should be light. When it is found that it cannot be pushed, do not pull and push hard. The fault should be eliminated first. The main reason why it is difficult to push and pull aluminum alloy doors and windows is dust accumulation and Deformation. Dust accumulation in the groove and sealing strip can be removed by vacuum cleaner to keep the door frame and sliding groove clean. Sealing Strip and silicon sealant seal are the key components to ensure the air tightness and heat insulation performance of aluminum alloy doors and windows. If they fall off or loosen, they should be repaired and replaced in time.
3. The connection parts of the frame should be checked frequently, tighten the loose bolts and replace the aged parts. Check wind brace, floor spring, and positioning shaft pin frequently. The parts of aluminum alloy doors and windows that are prone to failure are regularly added with lubricating oil to make the transmission parts inside the doors and windows go slick, so that aluminum alloy doors and windows can keep pushing and pulling freely for a long time.
4. Remind everyone that after the rain, the wet glass and doors and windows should be wiped dry in time, especially the sliding chute water should be dried.
Foshan aluminum alloy door and window factory is a comprehensive door company integrating the development, production and sales of aluminum alloy decorative doors. The products in charge include, aluminium alloy door, sliding door, hanging door, folding door, open door, grid door, closet door, etc. The whole process adopts European manufacturing technology, from raw materials into the factory, processing, production, assembly, the debugging has passed strict inspection, and the product quality and various technical performances have reached the national standards.
