The installation of the window is a fine work, which tests the ability of the Decoration Master. Once there is deviation, it must be redone, but if it is not checked out, it will be used in the future, security has a great impact. Whether you ask someone to install it or install it yourself, you still need to know the precautions for installing windows.
What are the precautions for installing windows?
1. Many families are in A faucet is set on the doors and windows, and a washing machine is placed. The washed clothes can be directly dried, or a vegetable washing sink is set in the doors and windows for kitchen use. Therefore, the waterproof layer and drainage system on the floor of the doors and windows should be well done. If drainage and waterproof are not good, there will be water accumulation and leakage.
2. Now there are 2-3 doors and windows in the residence. Before decoration, the main and secondary doors and windows should be distinguished to clarify the function of each door and window. The main doors and windows are usually adjacent to the living room and the master bedroom. They are mainly leisure and fitness, and can be installed in teahouses, gyms, etc. The decorative materials on the wall and floor should be matched with those in the living room; Generally, the living room, rooms outside the master bedroom or adjacent to the kitchen are secondary doors and windows, mainly clothes drying, storage and so on. The decoration can be simpler.
3. Most of the windows now are aluminum alloy windows. During the installation process, the firmness of the windows must be ensured. The dragging fan must have anti-falling measures to avoid falling off during use.
4. During installation, check the window first to see if it is qualified, if there is any obvious damage, and if there is any crack in the glass.
5. The packaging quality of doors and windows is the key in the decoration of doors and windows. Pay attention to its wind resistance, install it firmly and seal it well. Casement the lower mouth is the easiest to seep water. Generally, 2cm gap is reserved under the window frame and filled with special sealant or cement. If there is a windowsill, make a running slope outward.
6. Anti-corrosion work should be done on the surface around the window, and the edge of the window can be treated according to the design requirements. If there is no requirement, you can apply anticorrosive paint or paste plastic film and other materials on the edge of the window for anti-corrosion. It is cement mortar that directly contacts aluminum alloy windows and produces chemical reaction.
7. During the installation process, the products should be protected, the cement mortar dropped on the surface of doors and windows should be removed in time, and the damaged and dropped protective laminating film and films should be sealed in time.
8. Window gap treatment is also the most important detail treatment during window installation. After the adjustment of the window is completed, it is necessary to soak feet at the gap to fill the gap between the window and the wall. After Styrofoam, apply sealant to the edge of the window frame, which is the key point to prevent rainwater penetration.
The above is an introduction to the precautions for installing windows. Do you understand after reading it? If you want to know more, please continue to pay attention to this site.
