Which Opening & Closing mode is more space-saving when designing the sun room? Which design is more suitable for your needs? Don't underestimate a small door. Any detail will have a crucial impact on the whole design.
Therefore, if you want to try some distinctive solutions, you might as well follow RAINBOW editor to see what forms of doors are available!
Combined
this beautiful sunshine room adopts a more interesting combination of sliding door. First of all, the glass doors installed in the two inside the Sunshine Room can connect the indoor and outdoor space to the greatest extent after sliding. When closed, the two sliding door are made of glass, it also perfectly maintains good lighting effect. Secondly, this Sunshine Room also uses an ordinary sliding door, providing the host with multiple route choices.
Slide & show
sliding door is the most common choice to replace folding door, but this will often increase your renovation costs.
Generally, sliding door consists of two to three glass doors and tracks. The advantage of this is that when sliding door is opened, they can receive one side neatly without affecting lighting and visual effects.
You can select an ultra-thin frame to reduce the impact of the frame on visual effects when the sliding door is closed.
Open a corner
if the space of your sun room is not too large, it is recommended that you install two sliding door fans at one corner to achieve the effect of expanding the connection with the outside. If possible, you can choose a frameless design or design a simple column at the corner.
Enlarged height
when building a two-story Sunshine house like this, the basement is usually connected with the space on the ground floor. In this design, the designer used a 5-meter-high French glass window to solve the lighting problem of the basement and the first-floor space.
If the space of your sun room is not too large, it is recommended that you install two sliding door fans at one corner to achieve the effect of expanding the connection with the outside. If possible, you can choose a frameless design or design a simple column at the corner.
Upgrade Classic
this sunshine room is designed in a very classic modern style, with classic French windows and two almost identical glass doors. The ultra-thin black frame can ensure that the sunlight shines into the interior of the room to the greatest extent, and at the same time, it also adds a rough temperament to the appearance of the whole Sunshine Room.
Try trio
this sunshine room design uses three rotating shaft doors that can rotate 90 degrees. When all three turnstiles are opened, four passages can be formed to enter and exit the Sunshine Room.
It should be noted that the rotating shaft of each turnstile should be uniformly located in the middle position. However, this design is not suitable for the entry and exit of larger objects.
Single Gate
although the sun room with full glass design is quite attractive in appearance, the actual situation is that the weather of England is not suitable for this design. The smarter solution is to install glass cover in some parts, which can ensure lighting when the weather is clear. If the weather permits, you can also open the glass door to increase lighting.
This Sunshine Room uses the super-high glass door to the top, which is twice as high as the ordinary door. It is not only more concise in visual effect, but also increases the lighting area.
Keep it simple
simple French windows and white wooden frames have laid a fresh and modern style for this Sunshine Room. In addition, the white frame is also unified with the owner's interior design, which is the simplest but most effective solution.
Beauty of rotating shaft
turning the door, when closed, because there is no complicated joint, turning the door can form a very simple appearance. When opened, the two doors can turn 180 ° to the glass part connected with them to communicate with the outside to the greatest extent.
