The so-called "cold in three nine, four Nine", before the winter solstice is usually not very cold, the real cold is after the winter solstice. The outdoor temperature is getting lower and lower, and the indoor temperature also drops. Obviously, the doors and windows have been closed, but I always feel that the cold wind outside the doors and windows drifts into the room, and the room cannot warm up. Don't underestimate this small air leakage problem, it will directly affect our quality of life and happiness index in winter.
How to choose doors and windows with good insulation performance
to keep warm in winter, it is particularly important to choose Windows with strong light transmission, low thermal conductivity and good sealing performance. The survey found that the doors and windows sold in the market are mainly plastic-steel windows, and there are a small number of aluminum doors and windows and aluminum alloy doors and windows with broken bridge insulation device. For reference to the above thermal insulation performance, the aluminium wraping wooden window is even better. Staman uses imported solid wood, 7 processes and imported high-strength bonding, which makes the wood superior in strength, corrosion and weather resistance.
Natural solid wood with warm feel
aluminium wraping wooden window wooden window frames and windows have extremely low thermal conductivity, and the frame heat transfer coefficient of wood itself is far better than that of aluminum window and plastic windows, plus aluminum clad wood doors and windows composite frame, which has stronger thermal insulation performance. Blocking the indoor and outdoor energy transfer of the thermal bridge, the energy saving effect is very obvious, ensuring the necessary environmental protection and energy saving of the building.
Energy-saving tempered insulation glass
the effect of glass has a great influence on the thermal insulation performance of the whole window. However, we often choose glass types such as hollow glass, three-glass two-chamber, Low-e hollow glass, and Low-e three-glass two-chamber glass, but for heat preservation, Low-e glass has better performance. This is mainly because Low-e pays more attention to its heat control, cooling cost and comfortable balance of internal sunlight projection. Its coating layer has the characteristics of high penetration of visible light and high reflection of Central and infrared rays, compared with ordinary glass, it has more skillful heat insulation effect.
Insulation strip for doors and windows
as an important part of energy saving of doors and windows, the quality of heat insulation strip not only determines the heat insulation effect of aluminum alloy doors and windows, but also determines the application experience of doors and windows. Generally speaking, more than 50% of the building energy loss is lost through doors and windows, while the heat insulation strip whose cost only accounts for about 4% of the cost of doors and windows has more than 50% of the heat insulation effect of aluminum alloy doors and windows, the better the heat insulation strip, the less heat transfer between indoor and outdoor, and the better the heat preservation.
The cold winter solstice
there is Staman in
A green winter
