We all know that when decorating, every process needs to be checked and accepted before the next construction can be carried out. For many owners, after all, it is not the decoration industry and the details of acceptance are not clear, I think as long as it looks beautiful, in fact, it is not. The acceptance is also very exquisite. Today, I will take a look at the acceptance procedures of plastic steel doors and windows.
Plastic steel doors and windows are a special product, from profile production to window assembly are carried out in the assembly plant, as long as the installation conforms to the standard, it is difficult for consumers to check the quality of doors and windows without tools, however, this does not mean that consumers cannot inspect plastic-steel doors and windows, and they can only "obey fate.
(The image is from the Internet and deleted)
1. Look at the window surface:
the window frame should be clean, smooth, smooth, with no scratches, bumps or open welding fracture on the large surface.
2. Look at the hardware:
hardware should be complete, with correct position, firm installation and flexible use, and can achieve their respective functions.
3. Look at the glass sealing strip:
the contact between the sealing strip and glass and glazing rebate should be flat, and no curling or grooving should be allowed.
4. Look at the sealing quality:
when the doors and windows are closed, there is no obvious gap between the fan and the frame, and the sealing strip on the sealing surface should be in a compressed state.
5. Look at the glass:
the glass should be flat, installed firmly, and there should be no looseness. Single-layer glass should not directly contact with profiles. The inner and outer surfaces of double-layer glass should be clean. There should be no dust and moisture in the glass interlayer, and the barrier should not be raised.
(The image is from the Internet and deleted)
6. Look at the layering:
the bead with sealing strip must be tightly attached to the glass. There is no obvious gap at the joint between the bead and the profile, and the gap at the joint should be less than or equal to 1mm.
7. Look at the stitching material:
the splicing material should be closely connected with the window frame, and sealed with caulking paste at the same time, and should not be loose. The screw spacing should be less than or equal to 600mm, and both ends of the lined reinforced steel should be firmly fixed with the opening.
8. Look at the switch parts:
the flat open, sliding or rotating windows should be closed tightly.
9. Look at the connection between the frame and the Wall:
the window frame should be horizontal and vertical, with the same height and height. The distance between the fixing parts should be less than or equal to 600mm. The frame and the wall should be firmly connected. The gap should be filled with elastic materials and filled with full, and the surface should be sealed with sealant, no cracks.
10. Look at the drain hole:
the position of the drain hole should be correct and at the same time be smooth.
Doors and windows play a vital role in our daily home, and acceptance checks cannot be let go casually! Otherwise, if you find any problems after checking in, it will only add troubles to yourself. The items listed above are matters needing attention in acceptance, and I hope they can help you.
