Modern people like aluminum alloy doors and windows, but aluminum alloy doors and windows also need to be well maintained. So do you know how to maintain doors and windows? Next, I will teach you the maintenance and care of aluminum alloy doors and windows!
How to maintain and maintain aluminum alloy doors and windows at ordinary times?
1, aluminum alloy doors and windows in use, the action should be light, push and pull let nature take its course; Find difficulties do not pull hard push, should first troubleshoot. Ash accumulation and deformation are the main reasons why it is difficult to introduce aluminum alloy doors and windows. Keep the door frame clean, especially the sliding groove clean. A vacuum cleaner can be used to remove wool tops of dust accumulated in the groove and door seal.
2. When cleaning aluminum alloy doors and windows, people should not step on the aluminum frame or hold the frame for support.
3. Aluminum alloy doors and windows can be stained with clean water or neutral detergent with soft cloth. Do not use ordinary soap and washing powder, and do not use strong acid and alkali cleaners such as stain removing powder and toilet detergent.
(Image from: Network, invasion and deletion)
4. After rainy days, wet glass and doors and window frames should be wiped out in time, and special attention should be paid to wiping out sliding chute water. Sliding chute for a long time, the friction force increases, you can add a little oil or apply a layer of fire wax oil.
5. Check the connection parts of aluminum alloy frame frequently, tighten the bolts in time, and replace damaged parts. Locate vulnerable parts of aluminum alloy doors and windows such as shaft pin, wind brace, and floor spring, and check them frequently. Add lubricating oil regularly to keep them clean and flexible.
6. Sealing wool tops and silicon sealant is the key structure to ensure the sealing and insulation of doors and windows. If there is any falling off, it should be repaired and replaced in time.
(Image from: Network, invasion and deletion)
7. Check the joint of the aluminum alloy frame wall frequently. If it is loose for a long time, it will easily deform the frame as a whole, making the doors and windows unable to be closed and sealed. Therefore, the screw at the joint should be tightened immediately. If the screw footing is loose, use epoxy strong glue to adjust a small amount of cement to seal.
The above is about the maintenance and care of aluminum alloy doors and windows. I hope it will be helpful to you!
