Plastic steel windows shield our life from wind and rain, allowing us to live a comfortable life, but if the wind leaks, this comfort will also be broken. So what should I do if the plastic steel doors and windows leak?
I. What is the reason for air leakage of plastic steel doors and windows?
To solve a problem, we must first find out the cause of the problem, so to solve the problem of air leakage of plastic steel doors and windows, we should first find out the cause of air leakage of plastic steel doors and windows, see if the window is not installed properly or there is a problem with the window itself. If there is a problem with the window, then you need to find a seller or manufacturer. If it is an installation problem, then you can remove the window yourself and reinstall it. You can also clean the gap between the door set and the window frame, and then use some Styrofoam fill plug to enter it, then fill it with some cement and sand, and then do a good job of repairing, so the air leakage situation can also be solved.
(Image Source: Network, invasion and deletion)
II. How to solve the air leakage of plastic steel doors and windows?
1. Fill the gap
if the air leakage of plastic steel window is caused by the gap between the window, then you need to clean the dust and dirt in the gap between the wall and the window frame, and then fill it with some Styrofoam, then you can use some cement and sand to fill the gap, and then modify it. If there is air leakage between the window frame and Casement, then you can use some sealing strips to repair it, if the gap between them is very large, then it is necessary to add a layer of plastic steel window to the original window, so as to solve the problem of air leakage.
2. Plastic steel window plus plastic
window leakage will be very uncomfortable in winter. Plastic steel windows are prone to ventilation after being used for a long time. If the gap at the interface is relatively large, there is no way to close them, you can paste it with sponge around the window, and then use the window plastic cover, so that there will be no air leakage problem, and the thermal effect is also very good.
(Image Source: Network, invasion and deletion)
3. Kraft paper paste method
what are the best ways to solve the leakage of plastic steel windows? The problem of air leakage in plastic steel windows can also be pasted with kraft paper. If old windows are used in the home, some sawdust can be filled in the interval between the Windows and Windows, which can solve the moisture, in this way, the cold air outside cannot enter the room. If the gap of plastic-steel window is relatively large, it can also be closed by some kraft paper and paste, which can play a very good repairing role and will not cause air leakage again, and the effect is also very obvious.
The above is the cause of air leakage of plastic steel doors and windows and the relevant knowledge of how to solve the air leakage of plastic steel doors and windows, hoping to be helpful to everyone.
