Aluminium windows is a window with frame and fan structure made of aluminum alloy building profiles, which is divided into ordinary aluminum alloy doors and windows and bridge-cutoff aluminum alloy doors and windows. Aluminium windows has beautiful appearance, sealing and high strength, and is widely used in the field of construction engineering. In home decoration, aluminum alloy doors and windows are commonly used to encapsulate balconies. So what series are there in aluminium windows? How to maintain aluminium windows?
(Image Source: creative, invasion and deletion)
what series are there in aluminium windows?
There are 70 series and 90 series in aluminium alloy sliding door, and 70 series can be used for aluminium alloy sliding door inside the house. The number of series indicates the number of millimeters of the door frame thickness construction dimension. Aluminium alloy sliding window has four types: 55 series, 60 series, 70 series and 90 series. Series selection should be based on the size of the window hole and the local wind pressure value. The aluminium alloy sliding window used as a closed balcony shall not be less than 70 series.
(Image Source: creative, invasion and deletion)
how to maintain aluminium windows?
1, aluminum alloy doors and windows in use, the action should be light, push and pull let nature take its course; Find difficulties do not pull hard push, should first troubleshoot. Ash accumulation and deformation are the main reasons why it is difficult to introduce aluminum alloy doors and windows. Keep the door frame clean, especially the sliding groove clean. A vacuum cleaner can be used to remove wool tops of dust accumulated in the groove and door seal.
2. When cleaning aluminum alloy doors and windows, people should not step on the aluminum frame or hold the frame for support.
3. Aluminum alloy doors and windows can be stained with clean water or neutral detergent with soft cloth. Do not use ordinary soap and washing powder, and do not use strong acid and alkali cleaners such as stain removing powder and toilet detergent.
4. After rainy days, wet glass and doors and window frames should be wiped out in time, and special attention should be paid to wiping out sliding chute water. Sliding chute for a long time, the friction force increases, you can add a little oil or apply a layer of fire wax oil.
5. Check the connection parts of aluminum alloy frame frequently, tighten the bolts in time, and replace damaged parts. Locate vulnerable parts of aluminum alloy doors and windows such as shaft pin, wind brace, and floor spring, and check them frequently. Add lubricating oil regularly to keep them clean and flexible.
6. Sealing wool tops and silicon sealant is the key structure to ensure the sealing and insulation of doors and windows. If there is any falling off, it should be repaired and replaced in time.
7. Check the joint of the aluminum alloy frame wall frequently. If it is loose for a long time, it will easily deform the frame as a whole, making the doors and windows unable to be closed and sealed. Therefore, the screw at the joint should be tightened immediately. If the screw footing is loose, use epoxy strong glue to adjust a small amount of cement to seal.
