The newly installed doors and windows in the home need acceptance, so what should we pay attention to when accepting? What are the acceptance criteria for aluminum alloy windows!
1. The variety, type, specification, size, performance, opening direction, installation position, connection method of metal windows and the wall thickness of aluminum alloy doors and windows should meet the design requirements. Anti-corrosion treatment, filling and sealing treatment of metal doors and windows shall meet the design requirements.
(Image from: Network, invasion and deletion)
inspection Methods: observation; Scale inspection; Inspection of product qualification certificate, performance test report, entry acceptance record and re-inspection report; Inspection of concealed works acceptance record.
2. Metal casement must be installed firmly, and the switch should be flexible, closed tightly, and there is no upside down. Sliding window fans must have anti-fall measures.
Inspection Methods: observation; Open and close inspection; Hand lever inspection.
(Image from: Network, invasion and deletion)
3, broken bridge aluminum doors and windows sliding door. Casement. The switching force shall not exceed 100N.
Inspection method: Use spring scale to check.
4. The rubber sealing strip or felt sealing strip of metal casement should be installed in good condition and cannot be removed from the groove.
Inspection Method: observe; Turn on and off the inspection.
The above is the answer to the questions related to the acceptance standard of aluminum alloy windows. I hope it will be helpful to you!
