After selecting doors and windows, many people basically won't take care of this matter any more. They think it is OK to install them, but in fact, most of the time the installation of doors and windows is the key, no matter when the installation is not in place, it is likely to affect the safety of the whole house. Today, Baileys door and window manufacturers will share with you 11 installation details that door and window manufacturers will not tell you, relationship life safety! Everyone needs to pay attention ~
(Image Source: Baileys doors and windows official website, invasion and deletion)
1. The family has old people, children and pets. From the perspective of safety, the doors and windows in the home should be equipped with Diamond Net car window shade as much as possible, which can effectively prevent mosquito and fall, and improve the safety of doors and windows.
2. In the installation of doors and windows, waterproof adhesive is a very important part. Different merchants have different contract details, some contain waterproof adhesive, and some do not contain waterproof. When negotiating prices with merchants, changsha partners should clarify the contract content with merchants to avoid subsequent "invisible expenses".
3. Sealing strip, seemingly unconspicuous, is actually the key to affecting the sealing of doors and windows. Don't listen to the merchant's words about how many seals there are. No matter 7 or 10 seals, it is better to choose a better sealing strip. This is the most important choice for doors and windows. Modern broken bridge aluminum doors and windows the common sealing strip is EPDM sealing strip, and the elasticity and toughness will be better.
4. The installation of Windows needs to be fixed with glue. In this process, Styrofoam and silicon sealant are essential. We must pay attention to the selection of their quality. The quality of Styrofoam and silicon sealant is not good, in the future, the probability of leakage and leakage of doors and windows will be very high.
5. Damage and leakage are easy to occur after a long period of Styrofoam. If the Styrofoam outside the window is dry, you can cut off the excess parts with a knife and seal them with silicon sealant.
6. There are some miscellaneous brand doors and windows manufacturers, in order to save the decoration cost, they will choose cheap acid glue. No matter the quality, environmental protection or service life of this kind of glue can't compare with neutral glue, changsha friends must keep an eye on these details.
7. In the case of large windows and several connected Windows, the column must be fixed to ensure the stability and safety of the whole window.
8. Column, there are also the names of Medium column, Medium column and reinforced column. Some merchants will be free of charge, and some of them are charged separately. All these need to be clearly listed in the quotation. There is another case of column charging: The window height exceeds a certain height. When the window is too high, load-bearing beams need to be installed, that is, horizontal columns. Due to the large materials used, many manufacturers will also charge separately.
(Image Source: Baileys doors and windows official website, invasion and deletion)
9. When the window produces a 90-degree corner, it is necessary to use the corner to connect the two glass pillars. Corner, door and window terms are corner columns, windows without turning and Radian do not need to be installed.
10. In broken bridge aluminum doors and windows angle code is an essential hardware. Its biggest function is to reinforce doors and windows so that they are not easy to deform and have better firmness, safety and wind pressure resistance. Two corner codes and one corner piece are required for one corner. To ensure the sealing of the whole window, corner glue is also used for the corner code, and some merchants will charge separately. The angle codes of regular manufacturers are made of aluminum profiles, and the wall thickness is not less than 3mm. Some bad merchants will replace aluminum profiles with plastic, and friends should carefully identify them.
11. Attached frame, also called auxiliary frame and protective frame, is fixed in the wall and added around the window, which can play a protective role. The secondary frame generally needs to be charged, but this is not a necessity and can be selected according to individual actual needs. The attached frame is not a necessity. In the following cases, you need to add an attached frame: the window should be covered with window frame; The window should be tiled; The top should be suspended ceiling; The window opening is uneven and cannot be fixed; old community Wall skin shoveled to red brick.
These details, general doors and windows manufacturers will not tell you, many people will not care about the installation of doors and windows, but these small details often determine the safety performance of doors and windows, we must pay attention.
