Nowadays, people's requirements are getting higher and higher, and they will also encounter various problems in installing windows. For example, how to install another layer of Windows without removing the original windows? In this question, it is not impossible, but it has certain requirements.
First, because the original window needs to add another layer of window, the window sill needs to be large enough, at least more than 6cm, and why is it more than 6cm, because it is done now casement window the minimum series of broken bridge aluminum is 60 series, it means that after finishing the window, Casement is located on the windowsill with a width of 6cm.
Second, how to open the original window type, is it open inside, open outside or push and pull.
(1) if the original window is casement window inside, if you want to add another layer of casement window inside, the window sill should be wider, and the open part of the outer window should be allowed out, so as not to affect the ventilation effect. If you can only install a layer of outwards opening window outside the original window, we recommend that you do not use a broken bridge aluminum window if the floor is relatively high. You can consider below five floors, and the property agrees to install it.
(2) if the original window is flat outside, you can directly install a layer of broken bridge aluminum casement window or flat hanging window, the sealing performance is improved by another degree without affecting the ventilation.
(3) If the original window is sliding window, you can directly install another layer of broken bridge aluminum sliding window inside. If the window sill is large enough, you can also put some decorations in the middle of the two-layer window.
Third, advantages and disadvantages are necessary. The biggest disadvantage of installing double-layer windows is that it is not very convenient to clean them up. After all, the gap between the two-layer windows will not be very large.
Double-layer windows are more suitable to be installed in street-facing and noisy environments, such as karaoke bars upstairs.
The above conditions can meet the conditions that the original windows are not removed and then installed with a layer of broken bridge aluminum windows, but in the end, designers still need to measure and design on site.