How thick is the household broken bridge aluminum window? This question is quite general. The Broken Bridge aluminum windows used at home can be said to be customized, and they are designed and installed according to their own conditions, let's take a look at some situations with me.
First: there are still many old houses around Beijing now, so when changing broken bridge aluminum windows, old houses are generally used 60 series broken Bridge aluminum, because the window sill of the old house is generally narrow, it cannot be a large series. 60 means that the width of the profile located on the windowsill is 6cm. You can measure it by yourself first and know it clearly. The wall thickness of 60 series Broken Bridge aluminum is 1.4mm, and profiles lower than 1.4mm are not up to standard. Consumers can go to the factory to measure with a ruler.
Second: Residents living near markets, schools and stations are generally recommended by designers. 70 series broken Bridge aluminum, its wall thickness is 1.8, can be equipped with two layers hollow glass, the coefficient of glass is 5 22 5, of which the thickness of 5 generation watch glass is 5mm,22 represents the distance between two pieces of glass is 22mm. The 70 series Broken Bridge aluminum with ten seals is the most suitable for some noisy environments.
Third: 80 series broken Bridge aluminum has twelve Super seals with a wall thickness of 1.8mm. Generally, 80 series is more used in villas, which is more suitable for large floor-to-ceiling windows. If it is used in high-rise buildings and the window is relatively large, install 80 series again. Broken bridge aluminum doors and windows if it is used for a long time, it may fall down, thus affecting the switch and other problems, and more seriously causing the doors and windows to break. Cause security risks. Therefore, it is most suitable for the villa to choose 80 series Broken Bridge aluminum.
Therefore, the thickness of household broken bridge aluminum windows is suitable according to your own specific situation, rather than the larger the model and thickness, the more suitable it is.