First sealed balcony window or tile first?
The most common problem with balcony sealing is to replace the broken bridge aluminum window first or stick tiles first. According to more than 10 years of work experience, give you a positive reply, install the Windows first, and then stick the tiles.
Advantages of installing broken bridge aluminum windows first:
1. More beautiful. Because the balcony needs to be sealed with expansion screws or slotted and other actions that damage the wall, it can be repaired better when pasting tiles.
2. Waterproof is better. During the construction of the developer, the plane of the balcony cannot be horizontal, while the balcony sealing must be horizontal, otherwise, when pushing and pulling in the future, it may be difficult to push, therefore, there must be a gap between the window and the Sun table, so it is necessary to make silicone waterproof. If it is the back tile, it is possible to cover the large gap, so the waterproof will be better.
In some cases, the rear balcony is first pasted with tiles. Some balcony surfaces are high outside and low inside (we will find that many netizens now have rough houses with balcony footlines inclined inside), in this way, it is easy to accumulate water when it rains (if you don't go out water pipe, it may seep water inside), which is called pouring water back. In this case, it is recommended to paste the tiles first, and repair the situation of high outside and low inside when pasting the tiles. In this way, after sealing the balcony, there will be no situation where water pipe will not go out.
After sealing the balcony, paste the tiles. The tiles and balcony windows are required to be flat. Naturally, it is more difficult to paste them first. Some people may mislead to stick tiles first. In fact, the hidden danger is greater and it may leak.
