Talking about the Processing Technology and Process of Hollow Glass

With the continuous progress of science and technology and the effective development of glass industry, hollow glass with its superior characteristics, it is constantly known by the public and gradually enters the homes of ordinary people. Now hollow glass has a wide range of application, which is not only effectively used in automobiles, airplanes, etc, and it is also widely used in urban buildings, of which only in production broken bridge aluminum doors and windows the demand is very large, because insulating glass can effectively strengthen the sound insulation and heat insulation performance of doors and windows. Let's talk about the technological process of insulating glass.
First of all, we need to cut sheet glass that meets the national standard. If the size is correct, we can use manual or machine to cut, but in the whole process, we should always pay attention not to scratch the surface of the glass and observe whether the internal condition of the glass is good. After the cutting is completed, we should also clean and dry the glass, when cleaning, be sure to use a professional cleaning machine equipped with deionized water. After washing, dry it strictly.
Secondly, the assembly of hollow glass requires temperature and humidity during the assembly process, and the temperature should be between 10-30 degrees, and because of the characteristics of desiccant itself, therefore, we should adopt a two-way sealing scheme, so as to ensure the strength of hollow glass and the effect of blocking gas sound, and broken bridge aluminum doors and windows this is exactly what you see.
Finally, after we produce the finished product, we should put it correctly, because it is a glass product after all, so we should meet the design requirements when placing it, otherwise it will affect the final quality of the glass, also, pay attention to that the bottom cannot be contaminated with some solvents with aggressive action, otherwise the sealing performance of the glass will be affected.