Today, I will teach you some ways to maintain aluminum alloy doors and windows so that your doors and windows can be used longer.
1. Material Maintenance
Because the material of aluminum alloy doors and windows is relatively light, don't pull or push them with too much strength at ordinary times. If you find that the doors and windows are not smooth when switching, you should first check the reason, is there dust and sand in the doors and windows? If there is any, clean it and keep the sliding groove of the doors and windows clean.
2. Regular cleaning
Aluminum alloy doors and windows should also be cleaned at ordinary times. Otherwise, small objects such as dust and impurities are attached to the doors and windows, which will cause bad influence on the use of doors and windows. Cleaning method, you can use some detergent to wet the cloth and wipe the doors and windows clean, but it should be noted that do not step on the aluminum frame when wiping, otherwise the door frame will not look good when it is deformed.
3. Pay attention to sliding chute
When it comes to rainy days, try to avoid the phenomenon of water accumulation around doors and windows, and wipe out the water in the push-pull groove in time, otherwise it will cause loss to doors and windows. In addition, if sliding chute is used for a long time, add some oil or hot wax oil to keep the doors and windows smooth.
4. Check accessories
In addition to the main body of doors and windows, the accessories of doors and windows should also be checked. For vulnerable parts such as positioning shaft pin, wind brace, floor spring, etc., it is necessary to check frequently, regularly add lubricating oil to keep clean, flexible and replace new accessories. In addition, sealing wool tops and silicon sealant are the key structures to ensure the sealing and insulation of doors and windows. If there are signs of falling off, they should be repaired and replaced in time.
More details are as follows:
1. When wiping the glass, frame, Casement and other aluminum alloy doors and windows, use a soft cloth to touch clean water or neutral detergent. Do not use washing powder, let alone stain removing powder, cleaning agents with strong acid and alkali such as toilet cleaning essence will be used to attack the surface protective layer of profiles and hardware. In the process of wiping clean, make sure that parts such as glass, frame and hardware are not scratched or latte art.
II. Deal with the groove and slide rail at the junction of frame fan every three months on time to prevent the accumulation of dust, sand and stone from affecting the normal use of hardware, soft fur or vacuum cleaner can also be used for finishing.
3. When recuperating aluminum alloy doors and windows, do not step directly on the aluminum frame, nor hold the window frame to maintain the shape of the body. In this way, the doors and windows and related accessories are simply damaged, including sudden safety incidents that are not noticed or are not properly protected.
Four, every three months to deal with broken bridge aluminum door and window frame corner, Fan Corner parts of the hardware inspection, quickly tighten the bolts, replace the damaged parts. Check the vulnerable parts of aluminum alloy doors and windows such as positioning button, wind brace, handle, transmission Rod, etc., and add smooth oil to the related parts when necessary. Sealant strip and silicon sealant are the main components to ensure the sealing and insulation of aluminum doors and windows. If there is any slip or damage, repair it quickly and replace it when it is urgent.
5. If the aluminum department with exposed aluminum doors and windows is oxidized, use a knife to gently scrape off the aluminum rust, wipe it with water, wipe it with a dry cloth, and polish it with wax oil and then polish it with a dry cloth, it is more smooth as new. Every six months, smooth oil can be used to smoothly recuperate hardware rolling, sliding, locking points and other parts, and then repeatedly open and close 3 to 5 times to ensure smoothness and increase the vitality of hardware transmission organization, ensure smooth application to achieve the effect of lengthening the service life of hardware.
Six, aluminum alloy doors and windows in use, the behavior should be light, push and pull gently, find it difficult to push, do not pull hard push, should first check and remove obstacles. If you find that it is difficult to push and pull aluminum alloy doors and windows due to dust accumulation and deformation, you must quickly sort out the dust accumulation in stone accumulation. It is unique to sort out the sliding groove, and it is also useful for vacuum cleaners to absorb wool tops of dust accumulation in the groove and door seal, the deformation should be repaired and restored quickly.
Doors and windows, as a safety barrier for home security, should not neglect its maintenance work. Only when the doors and windows are well maintained can they be used longer to ensure your home security. After reading it, you can use these methods to maintain your own doors and windows.
