1. Decoration is common. After decoration, what are the inspection specifications for aluminum alloy doors and windows? The types, types, specifications, scales and functions of aluminum alloy doors and windows should meet the planning requirements.
2. The inspection of aluminum alloy doors and windows is necessary, so the owner must know the inspection specifications of aluminum alloy doors and windows. The profiles and wall thickness of aluminum alloy doors and windows should meet the planning requirements, and the accessories should be made of stainless steel or galvanized.
3. During the inspection, what else does the common sense about the inspection specifications of aluminum alloy doors and windows include? Doors and windows should be horizontal and vertical, leaving a certain gap with the wall at the entrance. Cement mortar should not be used to fill plug the gap. Elastic materials should be used to fill and embed them tightly, and sealant should be used on the outside sealed.
4. In addition to the above inspection specifications, the inspection specifications for aluminum alloy doors and windows also include that aluminum alloy door and window frame devices must be strong. The number, orientation, embedding method and frame connection method of embedded parts must meet the planning requirements, the installation doors and windows on masonry are strictly prohibited to be fixed with Fastener. The Open direction, installation orientation and connection mode of aluminum alloy doors and windows should meet the planning requirements.
Aluminum alloy doors and windows should pay attention to certain procedures and specifications during acceptance. The window center line must be played according to the relevant size, no errors can occur, and a certain distance level should be maintained. If there are not too many differences between the incoming and outgoing lines and the labels on the drawing, it can be handled in advance. If there are some differences with the labels on the drawing, the measurement needs to be recalculated. When accepting aluminum alloy doors and windows, pay attention to whether the positions and holes on both sides of aluminum alloy doors and windows are consistent with those on the drawings. If the positions on both sides of aluminum alloy doors and windows do not match the holes, then the holes can be reprocessed and cleaned.
When checking and accepting aluminum alloy doors and windows, unpacking inspection is also required. After the packaging around the doors and windows is removed, the owner should carefully check the model, appearance, quality and leveling degree of the materials. If quality problems are found, they should be handled in time, only qualified can be installed. The installation of doors and windows should pay attention to the position of the horizontal line. Generally, the installation can be carried out according to the standard scale, and then the corresponding treatment can be carried out according to the actual situation. The thickness of the wall is processed according to the relevant width of the outer wall. Only after determining the installation position of aluminum alloy doors and windows on the wall can they be installed safely. When installing aluminum alloy doors and windows, make sure that the installation position is firm and correct, and make corresponding anti-corrosion treatment. If there is no special requirement, the decoration team will generally choose resin for caulking, avoid direct contact between aluminum alloy doors and windows and cement. There are three ways to fix the wall of aluminum alloy doors and windows. The first way is to drill holes with electric drills, and then use reinforced cement into the holes. After the cement solidifies, the reinforced steel and iron feet can be welded to death.
