[Introduction]: today's rapid development cannot be separated from industrial development. Industrial development also shows that noise pollution cannot be avoided. If there are old people and children in the family, the troubles will be easily displayed, therefore, the sound insulation of the house is very important, which is also closely related to the poor sound insulation of Windows. How to deal with the poor sound insulation of Windows? Then look down...
Today's rapid development cannot be separated from industrial development. Industrial development also shows that noise pollution cannot be avoided. If there are old people and children in the family, the troubles will be easily displayed, therefore, the sound insulation of the house is very important, which is also closely related to the poor sound insulation of Windows. How to deal with the poor sound insulation of Windows? Then look down...
1. Window sticker sound insulation film
when the windows have been installed but do not want to be replaced, you can choose a conservative method, that is, the sound insulation film on the window sticker, which is sandwiched by polyvinyl butyral (PVB) layer to hold the sound insulation resin in the middle. The whole intermediate film evenly distributes micro particles (thermal insulation micro particles) with heat insulation effect, which is the same as the mobile phone film.
2. Window sound deadening strip
some windows have been installed for a long time, and the sealing strip is of poor quality, which makes it difficult to guarantee the sealing performance. Nowadays, many soundproof window use EPDM sound proof adhesive tape, which is not only soundproof, but also has relatively strong corrosion performance.
3. Replace soundproof window
if you prefer sound insulation, you can also tear down the windows installed by the original developer and convert them into a layer of low-frequency soundproof window. If it is noise, you can generally use hollow glass windows, if the noise is continuous, laminated glass should be used to cut off the noise generated by cars come and go in all directions.
4. Add a layer of soundproof window
soundproof window the glass is thicker than that of ordinary windows, usually double or three layers. For windows like Kangying doors and windows with special processing layer, the hollow aluminum strip in the sound insulation layer will have desiccant, and the surrounding will be bonded with sealant, some products are added to the insulation layer, which can not only keep warm, but also make use of the insulation layer to absorb sound waves and reduce all kinds of noise.
The above is the window sound insulation scheme of Xiao Bian's personal recommend. Choose the sound insulation scheme that suits you and enjoy your quiet time. I hope that the small science popularization will be useful to everyone!
