Broken Bridge aluminum doors and windows what are the gluing skills? The following small editor will tell you. Gluing is the process of using tools (pneumatic, electric, manual) glue gun tools handle grips to seal, glue or caulk, and repair leaks. The advantage of gluing is that it is stronger, and has strong tightness and noise reduction. Method.
The first point is to use glue gun;
Second point: determine the width of the glue, that is, the width of the gap;
Third point: According to the width of the glue gap, cut plastic nozzle into a smaller caliber than the gap;
The fourth point: do a good job of protecting both sides of the glue gap, attach laminating film of 2-3cm on the glass, profile, stone, etc. on both sides of the gap, and attach to the glass, profile, stone plays a protective role, and it is also very convenient to correct the glue in the gap;
The fifth point: Master the speed of gluing and the speed of moving glue gun, and move glue gun according to the depth and level of the gap; The sixth point: repair the gluing area, find a shovel to flatten the uneven place, and repair cementing the place where the glue is not entered into the gap; Point 7: after 48 hours, remove the laminating film on both sides of the material to complete the construction.
Another method step:
First of all, when we glue broken bridge aluminum doors and windows, if we need to glue outdoors, we must glue outdoors, because if we force ourselves to glue indoors, the glue made at a glance will be uneven, which will not be waterproof.
Secondly, we are giving broken bridge aluminum doors and windows when gluing, we need to remove the adhesive tape on the edge of broken bridge aluminum doors and windows, and do not stick it on it to make it waterproof. This is also important. Otherwise, after a long time, the adhesive tape will be degummed, the waterproof effect is gone.
After that, when we glue broken bridge aluminum doors and windows, we use full glue as much as possible, that is, glue gun use full glue, so that we will not break the glue during the process, there are many unprofessional people who will break the glue, and then use another can of glue to continue beating. In this way, bubbles will appear, and the waterproof effect is extremely poor.
Then, when we glue broken bridge aluminum doors and windows, we still need to properly repair the positions that need to be glued before gluing, especially some hidden objects such as cement, because it will affect the effect after gluing, and the effect will be much better if it needs to be handled well before gluing.
After that, when we glue broken bridge aluminum doors and windows, when we roll the corner to glue, it is generally best to choose the way to make up, that is, don't go directly to the other side, we can change a smaller head after finishing the four edges, and then make up the glue of the four corners.
Finally, when we glue broken bridge aluminum doors and windows, we also need to pay attention to that after the glue is finished, we need to dispose of unnecessary glue around, because if not, those glue will be hard. After the silica gel is hard, it is difficult to deal with it. If there are obvious air holes, we can only repair cementing them properly and need to repair cementing them with a small head.
